1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 3.00 LPA
Hiring for Maintenance Engineer in Ahmednagar
Post: Maintenance Engineer Mechanical
Company profile: Company was started in 1991 with one power press serving kinetic Engineering
with pressed components in a 1500 sq. feet. press shop in Ahmednagar, Maharashtra.
Gradually the company expanded its customer base to include Electrical Switchgear industries.
It was in the year 2004, that the ...
1 Opening(s)
8.0 Year(s) To 15.0 Year(s)
6.00 LPA TO 8.00 LPA
Company Profile :
The Group mainly manufactures Auto Components and Aggregates for 2W, 3W and 4W Manufacturers,
Major Outputs are Exhaust Systems, Chassis and Frame Assemblies for 2W, 3W, 4W and other Vehicles.
Position: Asst. Manager/Dy Manager-Production
About the responsibilities of the position: The main activity of the production is that he is responsible for ...
3 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.00 LPA
Company Profile :
The Group mainly manufactures Auto Components and Aggregates for 2W, 3W and 4W Manufacturers,
Major Outputs are Exhaust Systems, Chassis and Frame Assemblies for 2W, 3W, 4W and other Vehicles.
Position: Senior Production Engineer (3 No)
About the responsibilities of the position: The main activity of the production is that he is ...
2 Opening(s)
2.0 Year(s) To 4.0 Year(s)
3.00 LPA TO 4.50 LPA
Hiring for NPD Engineer Company Profile : Sheet Metal Auto Mobile Auto Componenet Manufacturing Pvtl GroupPost : Development Engineer 02Salary would be: up to 4.50 Lac(s)Education : DME / BE Skills Set required/Job Profile :
• Experience in Tooling, Gauging, SPM.
• Having knowledge of 3D,(Solid Edge)
• Responsible for planning and developing new product as per customer requirement.
• ...
1 Opening(s)
6.0 Year(s) To 15.0 Year(s)
3.60 LPA TO 4.20 LPA
Hiring for Production Manager in AhmednagarCompany Profile: was started in 1991 with one power press serving with pressed components in a 1500 sq. feet. press shop in Ahmednagar, Maharashtra.
Gradually the company expanded its customer base to include Electrical Switch gear industries.
It was in the year 2004, that the company ...
4 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
Tool & Die Maker: Experience 2 to 5 Years
Education : - ITl-Tool & Die Maker / Diploma
Job Role:
1. Experience in sheet metal tool manufacturing.
2. Conventional &progressive tooling's experience.
3. He should ready to work in shift.
4. Need sign 3 yrs service bond
Salary would be: No bar for good candidates
for more details call on ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.50 LPA TO 2.00 LPA
Diploma, BE in Mechanical or Production with min 2 to 5 yrs exp in Quality dept. Required candidates from Glass industry or Sheet Metal/Pressparts Industry OnlyGender: Only Male candidates require.Job Profile:1. Responsible for inspection of raw material like Glass sheet/sheet metal. Should involve in in-process, inward and pre-dispatch inspection activities.2. ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
7.00 LPA TO 10.00 LPA
Development of New Products from Drawing to Stream Line Production.
Drawing Study & Feasibility study.
Design of Process Flow for assembly as well as loose parts.
Budget preparation & approval from management for New Projects
Project Planning, Machinery & Tools planning for new Project
Preparation of PFMEA & Control Plan
Vendor identification & Enquiry of quotations for Press Tools, Fixtures & Gauges
Tool costing & cost finalization with supplier
Design, concept discussion & approval for press tool , Fixtures & Gauges
Manufacturing schedule & Development plan for the tools & Fixtures
Floor plan layout & material handling plan
Operation sheets D.R. documents (PPAP) discussion & submission to the customer (Bajaj Auto Ltd.)
Physical tooling status, review & Conduct Trials for press tools, Fixtures & SPMs
SIR preparation, correction & approval from Customer
Preparation of Prepilot, Pilot batch & production trial run
In house production line layout as per floor plan
Mass production run
Final Process details hand over to the Production
Time study & Line Balancing
Skill : Press Shop Sheet Metal Product Delevement ,
Job Location : Waluj , Aurangabad
For more details call on 9765567699
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.50 LPA TO 5.00 LPA
Qualification: Any Graudate or Diploma / BE in Mechanical, ProductionExperience: Min 3 To 6 Yrs in handling Store & Dispatch activities from Fabrication Project base / Sheet metal parts manufacturing company.Work location: Pune ( Kelawade -> 25km from Katraj on Shirwal road)From Industry: Manufacturing, Heavy Fabrication project, Engineering, Sheet metal ...
2 Opening(s)
8.0 Year(s) To 15.0 Year(s)
4.00 LPA TO 5.50 LPA
Education DME/BE(Mech)Min 8 to 15 years of experience in sheet metal laser cutting, bending, fabrication, shot blasting, painting, powder coating, galvanizing & plating.Hands on experience of inspection of heavy as well as light fabrication components.To keep record & implementation of ISO DOCUMENTS.Sound knowledge of 7 QC tools, 8D, CAPA etc.To ...