1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 3.60 LPA
Job Description
27/04/24
HPS/2024/267
PPD Engineer
Male
1
2 to 3
DME/BE/BTECH -Mechanical
1) B.E Mechanical - 01 nos. (Male Only)
With 3 years of Exp.
1.1 Ensure proper production planning to meet 100% dispatch plans.
1.2 Manufacturing feasibility study of new drawings.
1.3 Preparation of stage 1st drawings.
1.4 Preparation of DOPC drawings.
Develop Production Plan & detailing all tasks to meet predicted completion date .Monitor Production and raw material cost. Prepare report about ...
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 4.20 LPA
Job Description
27/04/24
HPS/2024/263
PPC Engineer
Male
2
2 to 3
DME/BE/BTECH -Mechanical
1) B.E Mechanical - 02 nos. (Male Only)
With 3 years of Exp.
Develop Production Plan & detailing all tasks to meet predicted completion date .Monitor Production and raw material cost. Prepare report about productivity processes.Monitor production status and ensure timely delivery.
Production Planning, Co
Micrometer , Vernier Caliper ,Try Square, Pie Tape,
Manpower handling ,
Shop Floor Housekeeping,
Team Player & ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
5.00 LPA TO 9.00 LPA
Location :- Markal / Moshi
Deep knowledge of tooling.Knowledge of reading drawings.Knowledge of Fixture accessories must.Knowledge of cutting parameters on machines.Knowledge of SOP.Knowledge of CNC operating panel buttons.Knowledge of Vertical Machine Centre.Knowledge of Offset.Knowledge of measuring instruments.Good Analytical & problem-solving skills.Working knowledge with Micrometer, Jyoti, BFW.Handled minimum 10 machines.Good communication skills.
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 3.00 LPA
-ITI, diploma or equivalent with 4-6 years of experience operating TREVISAN machine in production machine shop.
- Hand on Experience of TREVISAN Machine Operating.
- Setting knowledge of TREVISAN Machine.
- To know about Drawing Reading and GD&T Parameter.
- To handle Quality instrument like Vernier,Bore gauge,Micrometer,Snap Gauge,Thread Plug Gauge and Height Gauge..
- To ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 3.00 LPA
-ITI, diploma or equivalent with 4-6 years of experience operating HMC production machine shop.
- Hand on Experience of HMC Operating.
- Setting knowledge of HMC.
- To know about Drawing Reading and GD&T Parameter.
- To handle Quality instrument like Vernier,Bore gauge,Micrometer,Snap Gauge,Thread Plug Gauge and Height Gauge..
- To know about CMM report ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 3.00 LPA
-ITI, diploma or equivalent with 4-6 years of experience operating CNC Turning production machine shop.
- Hand on Experience of CNC Turning Operating.
- Setting knowledge of CNC Turning.
- To know about Drawing Reading and GD&T Parameter.
- To handle Quality instrument like Vernier,Bore gauge,Micrometer,Snap Gauge,Thread Plug Gauge and Height Gauge..
- To know ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 3.00 LPA
-ITI, diploma or equivalent with 4-6 years of experience operating VTL Machine in production machine shop.
- Hand on Experience of VTL Operating.
- Setting knowledge of VTL Machine.
- To know about Drawing Reading and GD&T Parameter.
- To handle Quality instrument like Vernier,Bore gauge,Micrometer,Snap Gauge,Thread Plug Gauge and Height Gauge.
- To know ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 3.00 LPA
-ITI, diploma or equivalent with 4-6 years of experience operating VMC Machine in production machine shop.
- Hand on Experience of VMC Operating.
- Setting knowledge of VMC Machine.
- To know about Drawing Reading and GD&T Parameter.
- To handle Quality instrument like Vernier,Bore gauge,Micrometer,Snap Gauge,Thread Plug Gauge and Height Gauge.
- To know ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
8.00 LPA TO 10.00 LPA
CMM-CALYSPO (Windows based software used in 3Dco-ordinate measurement m/c for inspection) Uses Roughness tester Mahr model, Used to measurement of surface roughness parameters and Counter parameters of components of Engine parts
Monitoring and controlling of receipt material inspection (Machining, casting, Sheet metal, Molding & Rubber components) and also approved the inspection ...
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.60 LPA
JOB DESCRIPTION
Production
Male
1
4 to 5
BE Mechanical / DME Mechanical
Salary : 20000 to 30000
Location : Umbergaon Gujarat
Roles and Responsibilities
To measure dimensions using Vernier, Micrometer & VMM machine.
Should have Knowledge in SPC, 8D, read & understand engineering drawings , rejection analysis.
Knowledge of ISO documents.
Desired Candidate Profile
Diploma in Mechanical engineering