1 Opening(s)
12.0 Year(s) To 15.0 Year(s)
7.20 LPA TO 8.40 LPA
Job Description
The CCM Manager is responsible for overseeing the entire operation and maintenance of the Continuous Casting Machine in a steel plant. This role involves planning, coordinating, and supervising casting activities to ensure smooth and efficient billet/slab production while maintaining quality, safety, and productivity standards.
🔧 Key Responsibilities:
Supervise and manage all ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
2.00 LPA TO 4.00 LPA
25-02-25
HPS/2025/114
Mold Maintainace / Supervisor
Male
1
5 to 7
DME/BE.Mech
Must have experience of mould manufacturing, Repairs, Assembly & Maintenance
Should have hands on experience / knowledge of all tool room Machines..Should
have knowledge of keeping the records of mould periodical maintenance.
the act of keeping something in good condition by making repairs and
correcting problems. It can also ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
1. Manage all operational activities of the moulding department, including production, processing, machinemaintenance, and tool maintenance and repair.2. Ensure the efficient use of materials, machines, moulds, auxiliary equipment, and employees.3. Perform mould set-up and colour changes as required to meet production demands.4. Troubleshoot mould processes, machines, and auxiliary equipment to ...
1 Opening(s)
10.0 Year(s) To 12.0 Year(s)
12.00 LPA TO 14.00 LPA
Job Description:
Strategic Planning:
1) Develop and implement strategic plans for maintenance activities based on industry best practices.
2) Manage and optimize maintenance schedules to ensure maximum plant, machinery, and utility availability while minimizing costs.
Preventive Maintenance:
1) Plan and execute preventive maintenance activities for moulds, ensuring their optimal performance.
2) Monitor the availability of moulds ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
Not Disclosed by Recruiter
JOB RESPONSIBILITES / KRA
1. Operation of injection molding machinery
2. Responsibility for in-house and vendor-end production
3. Set daily, weekly, or monthly production plans along with raw materials and manpower.
4. Responsible for tool changes, setting process parameters, and production output.
5. Carry out routine maintenance on injection molding machines and auxiliary equipment.
6. Working with ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
Injection Molding Machine Operating Engineer
Qualification: CIPET –DPT
Experience: 3-5 Years
Job Description:
Willing to work in 3 shifts.
1.Operation of injection molding machinery.
2.Visual inspection of produc
Injection Molding Machine Operating Engineer
Qualification: CIPET –DPT
Experience: 3-5 Years
Job Description:
Willing to work in 3 shifts.
Operation of injection molding machinery.
Visual inspection of produced components for quality control ...
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.20 LPA
Job description
Immediately hiring for reputed Injection Moulding company@ Dadra And Nagar HavelliPost: Electrical MaintenanceQual: Diploma/Degree in ElectricalExp: 3 to 7 YrsSalary: As per the interviewRole: Maintenance Engineer
Industry Type: Plastic
Department: Production, Manufacturing & Engineering
Employment Type: Full Time, Permanent
Role Category: Operations, Maintenance & Support
Education
UG: Diploma in Electrical, B.Tech/B.E. in Electrical
Key Skills
Skills highlighted with ‘‘ are preferred key skills
1 Opening(s)
12.0 Year(s) To 15.0 Year(s)
15.00 LPA TO 16.00 LPA
.Distribution of work load to operators in order to achieve daily production target.
.Planning day to day production to achieve maximum production.
.Organizing daily work at shop floor.
.Working on CLF Injection Moulding System of various types of tonnage capacity like TX 750T,400T,230T,120T 285T,225T, Kabra Blown Film Extrusion, Stretch Film Extrusion.
.Handling DG Like ...
1 Opening(s)
15.0 Year(s) To 18.0 Year(s)
18.00 LPA TO 20.00 LPA
manufacturer the New Development Tools of (Plastic Mold and its planning for manufacturing and assembly And Its Trail.
Daily Monitoring of the project work and updating the requirement.
Daily work management.
Preparation and updating work instruction to all departments.
Customer interaction.
Conducting daily production and rejection meeting.
Improvise the customer base and new product development cycle ...
2 Opening(s)
0 To 1.0 Year(s)
2.00 LPA TO 2.50 LPA
Qualification: Degree or Diploma in Mechnical, Production, AutomobileExperience: 0 to 1 yr in Unigraphic (NX) & Autocad software knowledge mustWork location: Chakan in Pune
Job description:Must have knowledge of Unigraphic (NX) / UG NX software & Autocad.Tool room design ( die, mould & pattern core box knowledge )Creo 3d software. Knowledge ...