1 Opening(s)
12.0 Year(s) To 15.0 Year(s)
12.00 LPA TO 14.00 LPA
B. Tech/ M. Tech in Mechanical/ production engineering.
10-15 yrs of experience in reputed companies of rubber injection moulding companies.
Candidate should fully be aware about shopfloor activities.
Manpower handling, 7 QC tools, 6 Sigma etc.
Candidate should be familiar with types of rubber machines the candidate has worked particularly DESMA machines.
Candidate should be ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.60 LPA
URGENT REQUIREMENT
Date: 05.06.2026
Position - Extrusion Blow Moulding (EBM) Machine Operator
05.06.26
136029
HPS/2026/470
Extrusion Blow Moulding (EBM) machine operator
Male
1
2 to 5 yrs
12th/ITI
8 Hrs
Key Responsibilities
Operate and monitor Extrusion Blow Moulding (EBM) machines efficiently.
Set machine parameters and ensure smooth production operations.
Perform mould changing, machine setup, and troubleshooting.
Maintain product quality as per specifications.
Monitor production output and minimize wastage.
Follow ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.60 LPA TO 4.20 LPA
JOB DESCRIPTION
27.04.26
131937
HPS/2026/360
Robotic Injection Moulding m/c Operator
Male
2
2 to 5
12th/ITI/Diploma
Dadra
A Robotic Injection Moulding Machine Operator is a skilled professional responsible for setting up, monitoring, and operating plastic injection moulding machinery integrated with automated robotic systems
Robotic Operation & Monitoring: Overseeing robot programmed to extract parts from the mold, preventing mold damage, and improving cycle times.
Machine ...
2 Opening(s)
5.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 6.00 LPA
Job Title: Production Officer for Roto moulding Division/Department: Roto moulding
Work Location: GadegaonTotal Work Experience: 5 Years
Age /Gender Preference (if any): Below 40Travel Required: Not Required
Reports to (Title of Manager):DGM, Manager
EDUCATION QUALIFICATION: CIPET(DPT),Diploma in Plastic
OTHER PROFESSIONAL COURSES/CERTIFICATION (if required):
DUTIES AND RESPONSIBILITIES:
1. Production Process Knowledge of Roto-moulding2. Production Planning & shift Manage ...
1 Opening(s)
18.0 Year(s) To 20.0 Year(s)
22.00 LPA TO 25.00 LPA
Position: Head- Moulding Production
Location: Zaroli - Vapi
Experience: 18 - 20 Years
Industries: Automobile
Responsibilities
Production Management (Multi-Plant)
Oversee moulding production operations across all plants.
Ensure achievement of production targets in line with customer demand.
Monitor OEE, machine utilization, and productivity improvement.
Drive adherence to production planning and scheduling.
Process Optimization & Control
Establish standardized ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
4.00 LPA TO 4.56 LPA
Position: Sr. Engineer - Moulding
Location: Vapi
Experience: 2 - 3 Years
Industries: Automobile
Responsibilities:
Operate and supervise injection moulding machines for ABS plastic components
Set up, troubleshoot, and optimize moulding processes to ensure consistent quality
Monitor production parameters and implement process improvements
Ensure adherence to automotive industry quality standards and specifications
Coordinate ...
3 Opening(s)
1.0 Year(s) To 4.0 Year(s)
2.00 LPA TO 3.00 LPA
We are hiring a Assembly Executive (Injection Moulding Machines) in Ahmedabad.
Job Description – Assembly Executive (Injection Moulding Machines)
Department: Assembly / ProductionReports To: Assembly Manager / Production Head
Key Roles & Responsibilities:
Assemble injection moulding machines and sub-assembliesas per approved engineering drawings, BOMs, and assembly instructions.
Ensure accurate fitting, alignment, and installationof machine components including clamping ...
1 Opening(s)
7.0 Year(s) To 8.0 Year(s)
7.00 LPA TO 8.00 LPA
Position: Asst. Manager - Production(Moulding)
Location: Vapi
Experience: 7 - 8 Years
Industries: Automobile
Responsibilities:
Responsible for reducing rejection level below from the limit set by management.
Responsible for ...
1 Opening(s)
15.0 Year(s) To 22.0 Year(s)
12.00 LPA TO 15.00 LPA
A Senior Sales Manager in the injection moulding industry plays a pivotal role in driving business growth by managing sales strategies and developing relationships with clients within the plastics and manufacturing sectors. Below is an outline of the typical roles and responsibilities for such a position:
Key Responsibilities:
Sales Strategy Development:
Design and ...
3 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Handling Injection Moulding machine. JSW1000T, 850T, Milacron 910T, ZJPM 1200T, 160T, 430T Toyo180T
Daily morning meeting with teams to achieve production target
Daily production monitoring as per plan & Manpower planning operations
conducting productivity analysis and troubleshooting
Interact with related concern departments like Tool Room and Maintenance
Plastic processing tecniques injection molding, blow molding injection ...