2 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Post: Maintenance Engineer 3 Nos.
Education: DME
Experience: Min 3 Years
Interview Date: - 24 to 29 Nov. 2018
Job Responsibility:
Preventive maintenance and Breakdown Maintenance of All Machine
Handling the maintenance (PM & BM) of CNC & VMC,HMC Machine
To do the maintenance of Leak Test Machines
Working on POKAYOKE, KAIZEN activities
To do the maintenance of SPM machine like drilling, Tapping, Reaming
To do the Troubleshooting and Maintenance of PLC
Doing necessary arrangements for the machine parts as per required situations
Kaizen for Existing and old machines
Followed 1S, 2S and TPM Process during working
Maintenance for Utility section - Compressors, Electric reading, on a Monthly basis
SAP related PM module PM Orders, Break down notifications, PR, service PR.
Conducting periodic checks to ensure the performance of various equipment
To make Breakdown Reports, PM Reports, Checksheet of Machine.
To maintain the records as per (ISO) MTBF, MTTR
Installation of a new machine.
Job Location: Waluj MIDC, Aurangabad
Bus & Canteen facility not available
For More details call on 9765567509 / 7249840222
1 Opening(s)
0 To 1.0 Year(s)
1.20 LPA TO 1.80 LPA
Required: Reputed Company of SPM Mfg, Waluj MIDC Area Aurangabad
Electrical Engineer-
Fresher or 1 Yr. Experience
Education : Diploma in Electrical / Electronic
Skill / Knowledge in PLC, Panel Wiring & Panel Designing.
. Design Engineer- 1 Nos
- Mechanical Engineer (Qualification-BE/DME)
- Fresher or 1-year Experience
-Knowledge in Catia, 2D & 3 D Drafting, Solid Edge ...
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.40 LPA
Interview Date: 05/09/2018 & 06/09/2018
Post: Electrical Maintenance Engineer
Education: Diploma Electrical / BE Electrical
Job Profile :
1) Hand on CNC, VMC, HMC machine, Convention machines – SPM. Troubleshooting.
Works on Fanuc, Siemens, PLC Drive, Mitsubishi,
2) Updating document such as PM Checksheet, M/C History card,
3) PLC Programming. (Messing, Mitsubishi)
4) Maintenance Documents, PM,BD, TS Documents
Job Location: Waluj MIDC, Aurangabad
Send your ...
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
Not Disclosed by Recruiter
Qualification: Diploma or BE in Electronics or ITI in ElectronicsExperience: 1 to 3 yrs as service / Maintenance / Testing engg post in UPS / Power Electronics / Inverters / AC DC Converters / PCB Manufacturing industry.Location: Pune / Aurangabad Region
Job profile
To carry out task assigned to him in such a way ...
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.20 LPA
Designation : Machine Maintenance Engineer
Experience: 2 to 3 years in Plastic injection Molding Setup.
Salary Range : 1.8-2.2 LPA
Required Qualification - BE or Equivalent.
Job Desciption:
Maintenance of injection molding machine & SPM machine
Execution of PM & PDM as per schedule, Analysis of breakdowns
Execution of TPM &PM pillar Activities
Energy saving project
Attending major breakdown maintenance
Handling documentation of executive & planned maintenance
Execution of TBM CBM as per schedule
Study of detoriotive components
Applications of kaizen
Troubleshooting and attending breakdown maintenance
Housekeeping maintenance related to department modification and spare management
Implementing ISO/TS16949, 5’s and FORMELQ
To improve machine uptime (MTBF)
To improve machine repairs time (MTTR)
Maintained machine history card
To handle electrical supply system I.e.HT &Lt side
Maintenance of hydraulic system/ pneumatic system/ to develop ladder logic of PLC, AC, DC & Servo Drive
Keeping spare in ready operational condition and maintenance of utility equipment
Capable of handling electromechanical device Is. robot, chiller, ultrasonic welding m/c
Presentation of monthly PRM
Taking outside service appointment & spare management
Recording Daily Activity Report for Meter Reading (main transformer, all panel) &Organize receivable &commercial
Documents against invoice
Working on welding machine, grinding machine, injection model and plastic mold
Job Location : Waluj MIDC, Aurangabad
For more details call on 9765567509
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.60 LPA
Job Description:
Hiring for Maintenance Engineer
RESPONSIBILITY:-
Maintain TPM activity for PM pillar.
Preventive maintenance as per plan.
Attend all types breakdown in shift.
Why –why analysis on each breakdown.
Kaizen to improve MTTR, MTBF, Energy saving and Cost saving Kaizen.
PM and TBM improvement as per analysis of breakdown history.
Action taking on abnormality found during PM
Trouble shooting in all types of Gear Hobbing and Machining ...
2 Opening(s)
4.0 Year(s) To 6.0 Year(s)
3.36 LPA TO 3.85 LPA
Interview Date : 30/06/2018 & 02/07/2018
Post :
Senior Electrical Maintenance Engineer - 02
Salary : upto 3.85 Lac(s)
Education : Diploma Electrical / BE Electrical
Job Profile :
1) Hand on CNC, VMC, HMC machine, Convention machines – SPM. Troubleshooting.
Works on Fanuc , Siemens, PLc Drive, Mitsubishi,
2) Updating document such as PM Check sheet, M/C History card,
3) ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.30 LPA
KEY RESPONSIBILITY:
Maintenance activities of hydraulics/ Robotics/electric & Mechatronic
Maintenance of injection molding machine & SPM machine
Execution of PM & PDM as per schedule, Analysis of breakdowns
Execution of TPM &PM pillar Activities
Energy saving project
Attending major breakdown maintenance
Utility includes transformer, HT/LT switchgear, Air Compressor, DG set, pump house Head over crane, chiller, cooling tower, lux measurement. Firefighting system, R.o plant
Handling documentation of executive & planned maintenance
Execution of TBM CBM as per schedule
Study of detoriotive components
Applications of kaizen
Troubleshooting and attending breakdown maintenance
Housekeeping maintenance related to department modification and spare management
Implementing ISO/TS16949, 5’s and FORMELQ
To improve machine uptime (MTBF)
To improve machine repairs time (MTTR)
Maintained machine history card
To handle electrical supply system I.e.HT &Lt side
Maintenance of hydraulic system/ pneumatic system/ to develop ladder logic of PLC, AC, DC & Servo Drive
Keeping spare in ready operational condition and maintenance of utility equipment
Preparing Machine Check List: sm 450t, sm 350, Magna150t, Magna 200t, htw90, htw60 & FOR 50TH machine
Capable of handling electromechanical device Is. robot, chiller, ultrasonic welding m/c
Presentation of monthly PRM
Taking outside service appointment & spare management
Recording Daily Activity Report for Meter Reading (main transformer, all panel) &Organize receivable &commercial
Documents against invoice
Managing maintenance of machine control panel, assembly line, plant lighting, street lighting, & all electrical work in plant as well as of communication buses RS232, RS485, DH485&Modbus
Working on welding machine, grinding machine, oil filter machine water chiller, rivet gun, hydraulic pneumatic machine, DG set, exhausts fan & dehumidifier, injection model and plastic mold
Job Location : Waluj MIDC, Aurangabad
For more details call on 9765567506
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.00 LPA
Post: Senior Maintenance Engineer
Education: DME / BE Mechanical
Experience: Min 3 Years
Salary up to 3.80 LPA
Skill required: Kaizen, TPM, and Autonomous
Plant Maintenance
Hand on CNC, VMC, HMC machine, Convention machines – SPM. Troubleshooting.
Works on Fanuc, Siemens, PLc Drive, Mitsubishi,
Updating document such as PM Check sheet, M/C History card,
PLC Programming. (Messing, Mitsubishi)
Maintenance Documents, PM,BD, ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Maintenance Engineer Mechanical - 01
Education : ITI / Diploma Mechanical / BE Mechanical
Experience : Min 2 Years
Salary : upto 3.00 LPA
Job Responsibility:
Preventive maintenance and Breakdown Maintenance of All Machine
To make Monthly,Yearly Preventive maintenance Plan all Machine as per the schedule.
To make maintenance of Power Press, Milling Machine, Cutting Machine
To make overall maintenance of CNC , VMC Machine
To do the Maintenance of Hass, AMS Make Machine
To Replace LM Guide, Spindle, Ball Screw, Regulating Wheel.
To do the maintenance CNC turning, Gedee Weiler
To Replace the Cylinder Seal, Hyd. Pump Seal, Pneumatic Cylinder
To do the maintenance of SPM machine like Wet end, End touch, Induction m/c.
Doing necessary arrangements for the machine parts as per required situations
Followed 1S, 2S and TPM Process during working
Maintenance for Utility section - Compressors, Electric reading, on Monthly basis
To make Breakdown Reports, PM Reports, Check sheet of Machine.
To maintain the records as per (ISO) MTBF, MTTR
Installation of new machine
Job Location : Waluj MIDC , Aurangabad
for More details call on 9765567699