339 Job openings found

4 Opening(s)
3.5 Year(s) To 5.5 Year(s)
7.00 LPA TO 11.00 LPA
Project Role : Application Support Engineer  Project Role Description : Act as software detectives, provide a dynamic service identifying and solving issues within multiple components of critical business systems.                                            ...
5 Opening(s)
8.0 Year(s) To 15.0 Year(s)
8.00 LPA TO 15.00 LPA
        Section Head – Production Maintenance   Location: Sanand (Gujarat) Qualification: Degree (Electrical / Electronics) Experience: 8 to 15 years   Technical Skills Required   Detail understanding of production equipment’s and SPM’s Knowledge of meter related testing as per IS/IEC. Understanding of Electronics Hardware testing & trouble-shooting based on Micro-controller & Analog and Digital Signal. MTTR/MTBF/OEE, Preventive Maintenance, Corrective Maintenance, Predictive maintenance ...
3 Opening(s)
8.0 Year(s) To 13.0 Year(s)
25.00 LPA TO 30.00 LPA
Role :   Role Description :   Must Have Skills : SAP ECC LE Warehouse Management  Good To Have Skills :   Job Description Additional Comments : Must have Skills : SAP ECC LE Warehouse Management  Good to Have Skills :  No Industry Specialty  Job Requirements : EI details - Kurian Joji  Should ...
2 Opening(s)
4.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 7.00 LPA
Job description Carrying out the injection molding machine installation, commissioning and service including monitoring machine parts, trouble-shooting. Setting up and trouble-shooting hydraulic valves and hydraulic cylinders. Trouble-shouting minor electronic and electrical issues of machines. Setting process parameters in machines for required product with minimized and reduced cycle time to utilize the maximum production output ...
2 Opening(s)
3.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Description:   Job profile - installation and commissioning of mcs ranges from 15 ton to 4500 ton.Servicing of mcs in above range.Candidates should hv wise knowledge in Electric. And decent knowledge in hydraulics and electronics.Pune enggs hv to travel to Maharashtra, Gujarat and MP state.Banglore area Engg has to travel to Karnataka, ...
2 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.00 LPA TO 3.00 LPA
Job description Carrying out the injection molding machine installation, commissioning and service including monitoring machine parts, trouble-shooting. Setting up and trouble-shooting hydraulic valves and hydraulic cylinders. Trouble-shouting minor electronic and electrical issues of machines. Setting process parameters in machines for required product with minimized and reduced cycle time to utilize the maximum production output ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
0.00 LPA TO 5.00 LPA
Designation: Marine mechanic Job Location: Al Laith, Kingdom of Saudi Arabia Experience: 2+ Years    Job Description    Reporting directly to FBU Maintenance Manager. Marine Mechanic must be responsible for completing periodic inspections, scheduled of maintenance, diagnosis, and repairs on a variety of marine diesel inboard and petrol outboard motors, trouble shoot, and repair of hydraulic system ...
1 Opening(s)
10.0 Year(s) To 20.0 Year(s)
Not Disclosed by Recruiter
DESIGNATION : Manager/Sr. Manager – OPERATIONS (SFS) Location:  Musarane,(On Wada-Thane Road)               Company Bus facility available from Thane, Kalyan, Dombivali, Badlapur, Virar.               Canteen facility available   EXPECTATIONS: 1.Independent handling of Operations in mid to large size Fasteners Manufacturing Company.2.Need to have exposure to ...
1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 6.00 LPA
Stream wise effluent analysis from inlet to outlet (ETP/MEE/UF/RO/STP) with the parameter pH, COD, TDS, NH3N, SVI, DO Maintaining of lab instruments and its calibration record ET P Plant and lab housekeeping Preparation lab solution Trouble shooting and maintenance Maintaining ETP/MEE/UF/RO logbook Chemical consumption record and new procurement   Stream wise effluent analysis from inlet to outlet (ETP/MEE/UF/RO/STP) ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
12.00 LPA TO 17.00 LPA
Position:          Sr. Manager – Operations Location:         Wada - Palghar Experience:     10 - 12 Years Industries:      Engineering  Responsibilities:    Independent handling of Operations in mid to large size Fasteners Manufacturing Company. Need to have exposure to productivity improvement, cost reduction projects through concepts like Lean Manufacturing, Kaizen, Quality ...

Drop Your CV

We will consider your Profile for future Jobs

Submit Profile