1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 4.80 LPA
Position: Design Engineer (Electrical)
Location: Pune
Experience: 2 - 5 Years
Industries: Engineering
Responsibilities:
Electrical Design & Drafting
Design and develop electrical control panels, MCC panels, PLC panels, and automation panels.
Prepare GA drawings, schematic diagrams, single-line diagrams (SLD), wiring diagrams, terminal plans, cable schedules, and Bill of Materials (BOM).
Use ...
2 Opening(s)
3.0 Year(s) To 6.0 Year(s)
10.00 LPA TO 15.00 LPA
Application Engineer – Clamping Technology Jobs in Bangalore
Orbit Global HR Consultants LLP is hiring for an Application Engineer – Clamping Technology position with a reputed organization in Yeshwanthpur, Bangalore. This opportunity is ideal for Mechanical Engineering professionals with experience in machine tools, workholding solutions, manufacturing processes, and mechanical design.
Job Details
Job ...
1 Opening(s)
7.0 Year(s) To 10.0 Year(s)
15.00 LPA TO 22.00 LPA
We are looking for an experienced Asset Management / O&M Engineer to manage the operations, maintenance, performance and reliability of rooftop solar PV assets across client locations in Bahrain.
The incumbent will be responsible for ensuring optimal plant performance, minimizing downtime, coordinating preventive and corrective maintenance, and managing site-level technical and ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.50 LPA TO 5.50 LPA
Job Title: Safety In-charge (Ex-Army)
Department: Health, Safety & Environment (HSE)
Industry Type: Heavy Engineering / Iron & Steel / Railway Components Manufacturing
Location: Raipur / Chhattisgarh Industrial Area
Statutory & Regulatory Compliance: Ensure strict adherence to the Factories Act, State Factory Rules, and local safety directorate guidelines. Maintain all mandatory safety registers and ...
- Statutory & Regulatory Compliance: Ensure Strict Adherence To The Factories Act
- State Factory Rules
- And Local Safety Directorate Guidelines. Maintain All Mandatory Safety Registers And Documentation. Shop Floor Safety Oversight: Monitor Daily Operations Across Heavy Structural Fabrication Yards
- Welding Zones
- Material Handling
- And High-tonnage Crane/rigging Movements. Hazard Control & Risk Assessment: Conduct Regular Hazard Identification & Risk Assessment (hira)
- Job Safety Analysis (jsa)
- And Implement Preventive Engineering Controls. Training & Drills: Lead Daily/weekly Safety Briefing Sessions
- Toolbox Talks
- And Periodic Mock Drills (fire Fighting
- Structural Collapse
- Medical Emergency). Incident Investigation: Lead Root-cause Analysis (rca) For Any Near-misses
- Injuries
- Or Property Damage Incidents
- And Formulate Corrective And Preventive Action (capa) Plans. Ppe & Safety Audits: Enforce Strict Utilization Of Personal Protective Equipment (ppe) And Execute Internal Safety Audits To Identify And Rectify Workplace Hazards Proactively.
2 Opening(s)
1.0 Year(s) To 5.0 Year(s)
2.80 LPA TO 15.00 LPA
Position: Manager / Sr. Manager – Planning & Purchase
Location: Kuha, AhmedabadIndustry: Industrial Valve ManufacturingExperience: 5+ YearsCTC: ₹8–16 LPAQualification: Graduate / B.Tech / M.Tech
Job Responsibilities:
Manage production planning and material planning.
Handle purchase and procurement of outsourced components.
Develop and manage vendors for timely material supply.
Handle purchase orders, negotiation and cost optimization.
Monitor inventory and ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
8.00 LPA TO 12.00 LPA
JOB SUMMARY1. The Tool Maker is responsible for manufacturing/handling/maintenance ofwelding Fixtures, forming dies, pipe bending dies, structure handling beamsand stands etc.2. Manufacturing precision components used in production processes. The rolerequires expertise in conventional and non-conventional machining, Ability tointerpret Engineering Drawing, perform precision measurement and generateInspection reports and problem-solving to ensure ...
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
4.00 LPA TO 5.00 LPA
The Billing & Estimation Engineer will be responsible for preparing precise cost estimates, analyzing project specifications, managing quantities, and executing client/vendor billing. This role bridges the gap between project planning and financial execution, ensuring accuracy in project costing and timely bill settlements specifically for PEB and civil infrastructure projects.
Key Responsibilities
...
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
4.50 LPA TO 5.00 LPA
Position Overview
We are a premier company primarily engaged in the Pre-Engineered Buildings (PEB) sector. We are seeking a dynamic and technically sound Purchase Engineer to manage end-to-end procurement activities for our civil, structural, and infrastructure projects. The ideal candidate will be responsible for sourcing high-quality materials, negotiating costs, and ensuring ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 6.00 LPA
Quality Control & Assurance (QA/QC)
Perform incoming, in-process, and final quality inspections for raw materials, heavy structural fabrications, machined parts, and bought-out components.
Verify material test certificates (MTR), chemical composition reports, and physical test reports against project specifications.
Monitor welding quality, dimensional tolerances, and alignment checks using precision measuring tools and gauges.
Coordinate Non-Destructive ...
- 1. Core Engineering & Technical Keywords Mechanical Engineering Heavy Fabrication & Structural Steel Industrial Furnaces & Kilns Casthouse Equipment Equipment Design & Drawing Reading Autocad / Solidworks / Catia Plant Maintenance & Troubleshooting Hydraulic & Pneumatic Systems 2. Quality Assurance & Control (qa/qc) Keywords Qa/qc Inspection Dimensional Inspection & Metrology Non-destructive Testing (ndt Level Ii - Ut
- Rt
- Mpi
- Lpi) Material Test Reports (mtr) & Material Verification Vendor Quality Management & Supplier Audits Calibration Management Root Cause Analysis (rca) & Capa (corrective And Preventive Action) 3. Manufacturing Standards & Methodologies Iso 9001:2015 / Quality Management Systems (qms) Six Sigma (green / Yellow Belt) Lean Manufacturing 5s & Kaizen (continuous Improvement) Total Productive Maintenance (tpm) Shop-floor Operations & Safety Protocols