3 Opening(s)
3.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 5.00 LPA
NDT Certified
Knowledge of WPS, WPQ, PQR
Welding Process (Specially GMAW)
Have a skill to interpret structure drawing /code(IS,ASME,AWS,ASTM etc.,)
Inspect/monitor fit up, weld visual, final dimension inspection, blasting & painting etc
Ability to maintain documentation as per approved specification/quality assurance plan/code.
Structural Fabrication Must- Pre Engineering Building Preferred
All kind of QC Inspection(including Material inspection, fabrication work, ...
20 Opening(s)
2.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 9.00 LPA
Candidate is Must [ NDT (Leval 2) ] & have knowledge of RT, PT & MT
Must have knowledge of Basic Fabrications of Tank, Vessels
Can Perform Stage inspection as per drawing
Can prepare reports of inspection
Must understand drawings & can perform stage inspection
Can collect data and prepare report for ASBUILT drawing
Can Handle ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.00 LPA TO 4.00 LPA
-Having ASNT Level-II at least in DPT and RT.-Having details knowledge for pressure vessel, heat exchanger, Various skids etc. equipment’s.-Having enough knowledge for construction code as per EN and ASME.-Certification knowledge and having participate for Audit of U-Stamp, CE marking and ISO- 9001.-Production step wise knowledge and Inspection methodology like ...
1 Opening(s)
8.0 Year(s) To 15.0 Year(s)
0.00 LPA TO 0.00 LPA
Shall have a university degree or equivalent and a total of seven years inspection experience or a high school diploma with a total of ten years inspection experience.
Shall have three (3) years directly relating to supervision of construction activities in the Contract Scope of WORK (Such as: Installation Testing of ...
2 Opening(s)
5.0 Year(s) To 10.0 Year(s)
0.00 LPA TO 20.00 LPA
Designation: Welding Inspector
Job Location: Jubail, Saudi Arabia
Experience - 5+ years
Notice period - Immediate to 30 days
Job Description
He shall have a Saudi Aramco approval for Welding Inspector with CBT test passed.
He Shall be High School graduate, or equivalent; shall be able to read, write and speak English Language.
He shall have a ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
1.00 LPA TO 23.00 LPA
Designation: Mechanical/Piping QC Inspector
Job Location: Jubail
Experience: 5-7 Years
Job Description
He shall have a Saudi Aramco approval for Mechanical and Piping Inspector with CBT test passed.
He Shall be High School graduate, or equivalent; shall be able to read, write and speak English Language.
He shall be fully conversant with applicable Industry Standards and Specifications such as ...
5 Opening(s)
10.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
Job Description:
Candidates should possess demonstrated troubleshooting and problem-solving skills, and an ability to think logically and systematically in an efficient manner.
Experienced in engineering modifications including additional I/O capacity and cabling and tie-in to existing systems.
Knowledge of Supervisory Control and Data Acquisition (SCADA) and proficient in programming and interface configuration.
Knowledge and ...
1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Diploma Mechanical/ Diploma Fabrication Technology/ BE Mechanical.
Exp :- 2 years to 3 years Max and not beyond that.
Should have Exp in Drafting(2D) and understanding of ASME design codes.
Prefablely should be able to ready Pv-elite reports and co-relate with drawings been prepared.
Good Communication skill would be add on.
Must be pro-active.
1 Opening(s)
5.0 Year(s) To 12.0 Year(s)
0.00 LPA TO 0.00 LPA
Inspector shall have a university degree with minimum 5 years of inspection experience.
Inspector shall have a demonstrated background and thorough knowledge of codes such as ANSI B 31.3, 31.4 and 31.8, ASME Section V and IX, API 620 and 650, AWS D1.1, API 1104 required for the execution of the ...
1 Opening(s)
5.0 Year(s) To 15.0 Year(s)
0.00 LPA TO 0.00 LPA
Welding Inspector
Inspector shall have university degree with minimum 5 years of inspection experience.
Inspector shall be certified as an American Welding Society CWI, CSWIP 3.1 Certified Welding Inspector.
Inspector shall have a demonstrated background and thorough knowledge of codes such as ANSI B 31.3, 31.4 and 31.8, ASME Section V and IX, ...