1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 6.00 LPA
Description:
BOE certificate
Should be BOE CERTIFICATE
Operation and maintenance of boiler.Monitoring and control on DM plant parameter.Operation of turbine and auxiliary.Operation and maintenance of CHP and AHP.Costing of Power Generation.Planning for shut down and preventive maintenance.To provide all assistance for smooth operation.
have experience of Steam turbine & Boiler operations
Experience of maintenance & ...
2 Opening(s)
5.0 Year(s) To 10.0 Year(s)
6.00 LPA TO 9.00 LPA
BOE CERTIFICATE
We are Currently Looking for Engineer/Manager(power plant) for Well reputed cement plant at Maharashtra location.
Should be BOE CERTIFICATE
Operation and maintenance of boiler.Monitoring and control on DM plant parameter.Operation of turbine and auxiliary.Operation and maintenance of CHP and AHP.Costing of Power Generation.Planning for shut down and preventive maintenance.To provide all ...
1 Opening(s)
0 To 1.0 Year(s)
1.00 LPA TO 5.00 LPA
Job Description : Lead Thermal SystemsDesign ownership of Fuel Cell system-s Thermal Mangement SystemDevelopment of thermal management system simulation model enabling
control optimization across vehcile platforms.Support to systems engineering team with auxiliary sysetem simulations.Sizing and development of thermal system and aggreagates.Verification and validation of thermal system aggreagate perfomances.Perform DOEs on vehicle ...
2 Opening(s)
8.0 Year(s) To 12.0 Year(s)
Not Disclosed by Recruiter
Calculations of:
ü Direct Stroke Lightning Protection
ü Earthing Design
ü Bus bar Selection
ü Short Circuit Force
ü Sag Tension
ü Battery sizing
ü Capacitor bank sizing
ü Cable sizing
ü Illumination Design Calculation ( indoor & outdoor)
Preparation and Review of Drawings:
ü Single Line Diagrams
ü Protection & Metering
ü Layouts & Sections
ü Erection Key Diagram
ü Earthing Layout
ü Clearance Check ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
5.40 LPA TO 6.00 LPA
Description:
BOE CERTIFICATE
We are Currently Looking for BOILER OPERATION ENGINEER (BOE) for Well reputed cement plant at Satna (M.P) location.
Should be BOE CERTIFICATE
Operation and maintenance of boiler.Monitoring and control on DM plant parameter.Operation of turbine and auxiliary.Operation and maintenance of CHP and AHP.Costing of Power Generation.Planning for shut down and preventive maintenance.To provide all ...
4 Opening(s)
2.0 Year(s) To 7.0 Year(s)
2.00 LPA TO 4.80 LPA
Job description
Maint of EXTRUSION, BLOW & RUBBER MOLDING MACHINESHands-on exp in Machinery MaintReading of Machine DrawingExp in using instruments like MULTIMETER, CONTROL equipment, TOOLSSpares MgmtData Collection & Breakdown AnalysisUtility Maint
Responsible for planning, setting, and reviewing machine parameters at the time of mold changeover or machine startup.
Ensure the most efficient production ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 2.00 LPA
Operate conveyor belt to move objects.
Control speed and route of objects.
Take orders to have materials, products, or machinery moved.
Wait for incoming shipments and estimate delivery times.
Join sections of conveyor frames at temporary working areas, and connect power units.
Clean conveyor belt and remove debris.
Oil belts to ensure they move properly.
Move, assemble, ...
1 Opening(s)
1.0 Year(s) To 7.0 Year(s)
1.80 LPA TO 2.40 LPA
Minimum 2 to 5 Years Experience
Must have experience in operating Coating machines
Experience in machine setting and operation.
Records and maintains the production batch record during the coating operation.
Observes machine gauges and equipment calibration status and reports any deviations to Superiors.
Operates auxiliary equipment used in coating pans and Spray Gun setup.
Cleans and ...
1 Opening(s)
1.0 Year(s) To 7.0 Year(s)
1.80 LPA TO 2.40 LPA
Minimum 2 to 5 Years Experience
Must have experience in operating Coating machines
Experience in machine setting and operation.
Records and maintains the production batch record during the coating operation.
Observes machine gauges and equipment calibration status and reports any deviations to Superiors.
Operates auxiliary equipment used in coating pans and Spray Gun setup.
Cleans and ...
1 Opening(s)
5.0 Year(s) To 15.0 Year(s)
6.00 LPA TO 10.00 LPA
Job Requirement - Bachelor’s degree in Mechanical, Electrical or Engineering or related field or equivalent experience is required- A Minimum 5 years of experience in a role of production manager in a fast paced manufacturing environment.- Proficiency in MS Office software’s (MS Word, MS Excel, Outlook)- Strong leadership abilities to motivate ...