1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
We Are Hiring – Electrical Maintenance Engineer ⚡
🏢 Position : Electrical Maintenance Engineer 🎓 Qualification : BE / Diploma Electrical 👨🔧 Experience : 3 – 7 Years📍 Location : Savli, Vadodara 👨 Gender Preference : Male
🔹 Job Summary : We are looking for an experienced Electrical Maintenance Engineer with strong ...
50 Opening(s)
4.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 7.00 LPA
Key Responsibilities:
Oversee day-to-day DCS operations, ensuring smooth control of batch and continuous processes.
Monitor plant performance, troubleshoot system alarms, and coordinate with operations and maintenance teams.
Lead configuration, modification, and tuning of Yokogawa DCS logic, graphics, and control loops.
Ensure compliance with safety, quality, and environmental standards (SOPs, ISO, EHS).
Train and guide DCS ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.60 LPA
JOB DESCRIPTION
08.05.26
132710
HPS/2026/375
Maintenance Fitter(Hydraullic)
Male
1
2 to 5
ITI/DME
12 Hrs
Key Responsibilities:
Maintenance and Repair:
Performing routine maintenance, troubleshooting, and repairing malfunctioning or broken-down equipment.
Inspection:
Conducting regular inspections of equipment to identify potential issues and ensure compliance with safety standards.
Troubleshooting:
Diagnosing mechanical and electrical issues using technical manuals, schematics, and diagnostic tools.
Urgent Requirement Date :- 08.05.26Post : Maintenance Fitter(Hydraullic)/Male/HPS/2026/375Education ...
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
4.20 LPA TO 4.80 LPA
JOB DESCRIPTION
08.05.26
132709
HPS/2026/373
QMS Executive
Male
1
4 to 5
DME/B.E-Mech/B.Sc- CIPET
Surangi
We are seeking a qualified and experienced QMS Executive to manage and implement Quality Management System activities in a plastic manufacturing /Materbatch. unit. The candidate will ensure compliance with ISO standards, process quality control, documentation, and continuous improvement initiatives.
Key Responsibilities:
Maintain and improve the Quality Management ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.20 LPA
06.05.26
132707
HPS/2026/371
Maintainence Technician (Fitter-Welder)
Male
1
2 to 5
ITI/DME
10 Hours
Key Responsibilities:
Maintenance and Repair:
Performing routine maintenance, troubleshooting, and repairing malfunctioning or broken-down equipment.
Inspection:
Conducting regular inspections of equipment to identify potential issues and ensure compliance with safety standards.
Troubleshooting:
Diagnosing mechanical and electrical issues using technical manuals, schematics, and diagnostic tools.
Urgent Requirement Date :- 06.05.26Post : Maintainence Technician ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.60 LPA TO 2.40 LPA
Based on job listings for solar installation companies, a Front Desk/Receptionist role (often specifically for female candidates) typically involves a mix of visitor management, customer service, and administrative support, with a focus on scheduling site assessments.
Here is a comprehensive job description based on current 2026 industry requirements:
Job Title: Front Desk ...
3 Opening(s)
3.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
Installation: Install and commission three-phase wiring systems, motors, panels, and electrical equipment.
Maintenance: Perform preventive and breakdown maintenance of motors, control panels, MCCs, and distribution systems.
Panel Operations: Handle LT panels, changeover systems, and ensure proper load balancing across phases.
Testing & Inspection: Use instruments (multimeter, clamp meter, megger) for testing voltage, current, insulation, ...
3 Opening(s)
3.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
Installation: Install and commission three-phase wiring systems, motors, panels, and electrical equipment.
Maintenance: Perform preventive and breakdown maintenance of motors, control panels, MCCs, and distribution systems.
Panel Operations: Handle LT panels, changeover systems, and ensure proper load balancing across phases.
Testing & Inspection: Use instruments (multimeter, clamp meter, megger) for testing voltage, current, insulation, ...
1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.60 LPA
A VTL (Vertical Turning Lathe) Machine Operator in a foundry plant specializes in setting up and operating vertical lathes to machine large, heavy, or complex cast metal components (such as valve bodies, pump housings, or gears). This role ensures cast parts are machined precisely according to engineering specifications.
Key Responsibilities
Machine Setup: ...
1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.60 LPA
A CNC Machine Operator in a foundry plant sets up, operates, and monitors CNC machines (milling, turning, drilling) to finish cast metal parts according to technical drawings. They are responsible for loading castings, inspecting finished parts with precision tools, ensuring dimensional accuracy, and conducting basic machine maintenance while adhering to ...