1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
2.40 LPA TO 3.60 LPA
JOB DESCRIPTION
Job Title Service Technician – Sewage Treatment PlantsLocation BangaloreDepartment ServiceResponsibilities • Daily Visits to customer sites of STP, ETP, WTP forevaluating requirements of repair and maintenance• Check and repair/service pumps, motors, filters,compressors, belts, piping connections, pressurevessels, Gauges, chemical process etc..• Perform scheduled maintenance, adjustment, repairand monitoring of various mechanical ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.60 LPA TO 5.00 LPA
Design Engineer (Press tools)
Mandatory Skills
1) Sound Experience about Sheet Metal Conventional/ Progressive Press tool Design and Manufacturing.
2) Design and validation of Heavy Sheet metal (A/B/C Class Parts) Casting base structure tools Heavy Tools
3) Design and validation of Fixtures and Gauges
Good Knowledge about GD& T
Desirable Skills
Hand in a minimum of one ...
2 Opening(s)
0.6 Year(s) To 2.0 Year(s)
Not Disclosed by Recruiter
We are hiring for the following positions for one of our reputed clients.
Kindly find the positions details
a.) To make process flow diagrams & prepare list of fixtures, tools, sockets, gauges as per requirement b.) To consult suppliers and provide all necessary data c.) To review concept design d.) To finalize ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 2.00 LPA
Operate conveyor belt to move objects.
Control speed and route of objects.
Take orders to have materials, products, or machinery moved.
Wait for incoming shipments and estimate delivery times.
Join sections of conveyor frames at temporary working areas, and connect power units.
Clean conveyor belt and remove debris.
Oil belts to ensure they move properly.
Move, assemble, ...
1 Opening(s)
6.0 Year(s) To 12.0 Year(s)
Not Disclosed by Recruiter
Understanding of variety Support services that include:
? Wireline Cased Hole Tools Maintenance.
? Wireline Openhole Hole Tools Maintenance.
? Slickline Tools Maintenance.
? Permanent and Non-Permanent gauges.
? Seismic Equipment.
? Unit’s System & Depth Measuring Devices.
? General Periodic Maintenance.
? Repairing Equipment.
? Ordering of Spareparts
? Post Failure Analysis and Reporting
. ? Equipment tracking and management
Duties ...
1 Opening(s)
8.0 Year(s) To 12.0 Year(s)
Not Disclosed by Recruiter
Qualifications: BTech/DME in Mechanical, Production or AutomobileExperience: min 8 to 12 yrs exp in Designing of tooling & Development of Automobile industryWork location: Greater Noida
Job description1. Guages, fixtures & Tool design for all three lines(Rotor, CASA & Tube connector) products2. Tooling design for flaring, punching, bulging, crimping,bending, caulking etc3. Cutting ...
1 Opening(s)
15.0 Year(s) To 18.0 Year(s)
8.00 LPA TO 12.00 LPA
Prepare Calibration Schedule yearly with monthly as per plant wise
2) Master Instruments Calibration Maintain by Authorized party
3) Attend the break down as like Sox, NOx, Cox, PM2 sensor working
4) Check the PLC/ SCADA System to Field Instruments with feedback signal.
5) Energy Saving by Process control with new concept
6) Maintain the ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
10.00 LPA TO 12.00 LPA
Prepare Calibration Schedule yearly with monthly as per plant wise
2) Master Instruments Calibration Maintain by Authorized party
3) Attend the break down as like Sox, NOx, Cox, PM2 sensor working
4) Check the PLC/ SCADA System to Field Instruments with feedback signal.
5) Energy Saving by Process control with new concept
6) Maintain the ...
1 Opening(s)
1.0 Year(s) To 7.0 Year(s)
1.80 LPA TO 2.40 LPA
Minimum 2 to 5 Years Experience
Must have experience in operating Coating machines
Experience in machine setting and operation.
Records and maintains the production batch record during the coating operation.
Observes machine gauges and equipment calibration status and reports any deviations to Superiors.
Operates auxiliary equipment used in coating pans and Spray Gun setup.
Cleans and ...
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
Not Disclosed by Recruiter
ensure manufactured products meet the specified standards and specifications of the drawing and the parts meet quality standards.
Follow standardized procedures and instructions for in process and final inspections across a wide variety of customized parts and assemblies with very close tolerances and specifications.
Determine method of inspection and set up requirements ...