1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
4.50 LPA TO 5.50 LPA
A Senior Electrical Maintenance Engineer in a press shop with robotics in Chh. Sambhaji Nagar would typically be responsible for the maintenance, troubleshooting, and programming of complex electrical and automation systems within an automotive manufacturing environment. The job description encompasses hands-on work, team supervision, and continuous improvement initiatives.
Key Responsibilities
Breakdown & Preventive ...
1 Opening(s)
20.0 Year(s) To 25.0 Year(s)
15.00 LPA TO 20.00 LPA
A Head of Marketing for Foundry Products is a senior executive responsible for defining and executing the marketing strategy to drive business growth within the metal casting or semiconductor foundry industry. The role requires a blend of strategic planning, market analysis, business development, and team leadership.
Below is a general job description (JD) ...
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.60 LPA
A Quality In-Process Engineer in the sheet metal industry ensures that products meet quality standards during the manufacturing process, focusing on defect prevention, continuous improvement, and compliance with industry specifications.
Key Responsibilities
Process Monitoring and Inspection: Conduct in-process inspections of sheet metal parts (e.g., cutting, bending, welding) to verify adherence to engineering drawings, specifications, and ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
7.00 LPA TO 9.00 LPA
Description -Our client, a leading tube manufacturing company, is looking for a Senior Production Manager to lead production operations for tubes supplied to the automotive industry. The role requires strong technical expertise in tube manufacturing, process control, quality systems, and managing automotive customer requirements.
Key ResponsibilitiesProduction ManagementLead complete production operations for ...
4 Opening(s)
3.0 Year(s) To 7.0 Year(s)
Not Disclosed by Recruiter
Responsibilities:
Operate and program the CMM machine for part measurement.
Check and inspect parts as per engineering drawings.
Make sure parts meet required size and quality standards.
Record inspection results and maintain reports.
Maintain the CMM machine and keep the work area clean and safe.
Follow ISO / IATF documentation and company quality process.
Required Skills:
Hands-on experience ...
2 Opening(s)
5.0 Year(s) To 6.0 Year(s)
5.00 LPA TO 6.00 LPA
Position: Production Engineer
Location: Bhilad
Experience: 5 - 6 Years
Industries: Engineering
Responsibilities
To ensure all operations are carried out as per Process parameter / Production plan.
To do the patrolling inspection and process control on shop floor.
To organize and implement daily production activity on shop ...
1 Opening(s)
3.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.20 LPA
System development and implementation:
Develop, implement, and maintain the QMS, including writing procedures and ensuring compliance with IATF 16949, ISO 9001, and customer-specific requirements.
Auditing:
Conduct internal audits of business units and perform supplier audits to ensure adherence to quality standards and company requirements.
Problem-solving:
Analyze data, perform root cause analysis, and implement corrective and ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.50 LPA TO 4.20 LPA
Qualification:- Diploma Mech with min 8 years of Experience / BE Mech with Min 4 years ofExperience.- Quality Management System (QMS) certification ISO 9001-2015 is an addedadvantage.Job Description:- Incoming, In process & Final Inspection based on drawing.- First Part Approval followed by verification of Middle & last part of the ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Key Responsibilities:Quality Assurance & Control: Oversee quality control activities in the Enamelling section for copper and aluminiumwires, strips, and CTC. Ensure compliance with customer specifications, national/international standards(IEC, IS, NEMA, ASTM, etc.), and internal quality norms. Monitor and verify raw material, in-process, and finished goods quality. Conduct coating thickness, adhesion, flexibility, ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
2.90 LPA TO 4.80 LPA
Eligibility Criteria
Education: B.E. / B.Tech in Mechanical Engineering.
Experience: Minimum 5 years in production operations.
Preferably in AdBlue, Water Treatment, or Chemical Industry.
Joining: Immediate availability required.
Job Roles & Responsibilities
Supervise daily production as per the plan.
Ensure efficient utilization of plant, manpower, and resources.
Manage stock of Raw Material (RM) and Packing Material (PM).
Oversee QA ...