15 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Key Responsibilities:
Operate and monitor chemical plant equipment as per SOP.
Handle pumps, valves, pipelines and process equipment.
Monitor temperature, pressure, flow and other process parameters.
Carry out charging, material transfer and process operations.
Maintain production and batch/process records.
Follow safety, PPE and chemical handling procedures.
Identify abnormalities and report equipment/process issues.
Coordinate with Shift In-charge and Production ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.50 LPA TO 5.50 LPA
Job Title: Safety In-charge (Ex-Army)
Department: Health, Safety & Environment (HSE)
Industry Type: Heavy Engineering / Iron & Steel / Railway Components Manufacturing
Location: Raipur / Chhattisgarh Industrial Area
Statutory & Regulatory Compliance: Ensure strict adherence to the Factories Act, State Factory Rules, and local safety directorate guidelines. Maintain all mandatory safety registers and ...
- Statutory & Regulatory Compliance: Ensure Strict Adherence To The Factories Act
- State Factory Rules
- And Local Safety Directorate Guidelines. Maintain All Mandatory Safety Registers And Documentation. Shop Floor Safety Oversight: Monitor Daily Operations Across Heavy Structural Fabrication Yards
- Welding Zones
- Material Handling
- And High-tonnage Crane/rigging Movements. Hazard Control & Risk Assessment: Conduct Regular Hazard Identification & Risk Assessment (hira)
- Job Safety Analysis (jsa)
- And Implement Preventive Engineering Controls. Training & Drills: Lead Daily/weekly Safety Briefing Sessions
- Toolbox Talks
- And Periodic Mock Drills (fire Fighting
- Structural Collapse
- Medical Emergency). Incident Investigation: Lead Root-cause Analysis (rca) For Any Near-misses
- Injuries
- Or Property Damage Incidents
- And Formulate Corrective And Preventive Action (capa) Plans. Ppe & Safety Audits: Enforce Strict Utilization Of Personal Protective Equipment (ppe) And Execute Internal Safety Audits To Identify And Rectify Workplace Hazards Proactively.
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
JOB DESCRIPTION
Operator – Cutting & Packing Machine
Department: Cutting & Packing MachineLevel: Technical OperatorNo. of Openings: 1Experience: 3–5 yearsEmployment Type: Full-time
Qualification
ITI / Diploma in Mechanical, Fitter, Production or relevant trade.
Reporting To
Production In-charge / Shift Supervisor
Preferred Background
Sandwich-panel cutting / bandsaw / packing line experience preferred.
Role Purpose
Operate panel cutting/bandsaw and packing equipment to ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
Not Disclosed by Recruiter
JOB TITLE: Site Civil Engineer
LOCATION: Whitefield, Bangalore | Site-based
EXPERIENCE: 5+ Years
QUALIFICATION: Diploma / BE / BTech in Civil Engineering
EMPLOYMENT TYPE: Full-time
JOB DESCRIPTION:
KEY RESPONSIBILITIES:
Plan and supervise daily labour deployment as per item-rate subcontract requirements.
Verify measured work before weekly payment certification.
Raise material indents and verify incoming materials against DC and PO.
Maintain stock ...
2 Opening(s)
3.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 6.50 LPA
Job Title: Junior Engineer Tool Room /Team Member
Department: Tool Room Location: NUH, Haryana and UNNAO,UP Reports To: Tool Room In-Charge
Salary Range – 4 - 6.5 LPA
Job Summary
We are looking for a skilled Tool Room Technician with experience in tool and die maintenance, AutoCAD drawing reading, and standard tool room operations. ...
15 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Key Responsibilities:
Operate and monitor chemical plant equipment as per SOP.
Handle pumps, valves, pipelines and process equipment.
Monitor temperature, pressure, flow and other process parameters.
Carry out charging, material transfer and process operations.
Maintain production and batch/process records.
Follow safety, PPE and chemical handling procedures.
Identify abnormalities and report equipment/process issues.
Coordinate with Shift In-charge and Production ...
15 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Job Responsibilities
Operate and monitor chemical process equipment as per SOPs.
Handle reactors, pumps, valves, pipelines, and transfer operations.
Monitor temperature, pressure, flow, and other process parameters.
Perform charging, discharging, filtration, and material handling activities.
Follow batch manufacturing instructions and production schedules.
Maintain production logs, batch records, and shift handover reports.
Follow safety procedures, PPE requirements, and ...
1 Opening(s)
12.0 Year(s) To 15.0 Year(s)
12.00 LPA TO 18.00 LPA
The Deputy Manager - Production (Shift In-Charge) is responsible for leading and managing end-to-end production activities during assigned shifts across Machining and Assembly operations. The role ensures achievement of production targets, quality standards, safety compliance, manpower productivity, and continuous improvement initiatives. The incumbent will coordinate with cross-functional teams to drive ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
5.00 LPA TO 6.50 LPA
Business objectives
Conduct site level customization to admixture formulations to meet the performance requirements of client.
Test the above formulations for the desired test parameters.
Prepare samples of the finalized formulations to the client for their evaluation.
Technical Assistance
Formulating specialized concrete designs like self compacting concrete, precast concrete etc.
Provide technical assistance pre and post ...