1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
5.00 LPA TO 9.00 LPA
Location :- Markal / Moshi
Deep knowledge of tooling.Knowledge of reading drawings.Knowledge of Fixture accessories must.Knowledge of cutting parameters on machines.Knowledge of SOP.Knowledge of CNC operating panel buttons.Knowledge of Vertical Machine Centre.Knowledge of Offset.Knowledge of measuring instruments.Good Analytical & problem-solving skills.Working knowledge with Micrometer, Jyoti, BFW.Handled minimum 10 machines.Good communication skills.
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 3.00 LPA
Job Description
11/01/2024
HPS/2024/27
CNC machine operator
Male
1
1 to 4
Any Graduate
The requirement of CNC machine operator for manufacturing transformer laminations
The candidate should be ITI / Diploma (Mechanical) with minimum 2 years of experience in operation / programming of CNC Machines (CNC Vertical Turning Lathe, HMC, VMC & Turning Centre) on FANUC & SINUMERIK Control.
Knowledge of operating / ...
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
0.00 LPA TO 4.00 LPA
We have an urgent opening for the position of CNC Machine Programmer for a reputed company in the Gujarat (Vadodara) location.
Key Responsibilities:
Experience in the application of measuring instruments.
Training in CNC Programming
Good Command of 2D and 3D Programming.
Expertise in Drawing Reading.
Convergent in Tool selection
Candidates Profile:
Degree/Diploma in Mechanical Engineering.
Expert in VTL and VMC machine working.
Flexible approach to ...
2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
He Should familiar with Measuring Instruments like vernier callipers / plug gauge, dial gauge, micro meter, flap gauge.He should knowledge of standard specification.Part inspection, including layout in process final and receiving using all type of mechanical inspection.Capacity to work independly from similar supervision ( must be self-motivation once given direction ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.80 LPA TO 3.50 LPA
Qualification: Diploma / BE in Mechanical, ProductionExperience: min 2 to 5 yr experience in assist in day to day Quality inspection activities of Fabricated & Machined parts.Work location: Pirangut in Pune
Job Responsibilities:Inspection of All Incoming materialPrepare Inspection Report and fill all inspected data in report.Check all the parts as per drawing.Removing ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.00 LPA
Qualification: Diploma / BE in Mechanical, Production or AutomobileExperience: 1 to 3 yrs in handling Supplier quality, Supplier PPAP, Sample trial at Supplier end.Location: Vasai East in Thane
Job Description:Preferably from Automotive Electric/ Mechanical components manufacturing industry.ECR trial sample inspection.Sample trial to be attend at supplier end.Verify supplier PPAP documentsFollowup with ...
2 Opening(s)
3.0 Year(s) To 15.0 Year(s)
8.00 LPA TO 17.00 LPA
Mandatory Skills
Understanding and development of electronics for BLDCControllers.Understanding and Development of PFC Cirucit, Driver andPWM Controller.Knowledge of Analog, Digital and Opto-Isolator CircuitDesign for Drivers and Feedback Circuits.Understanding of hall sensor working principle,.Knowledge of EMI/EMC in the SMPS Topology.Knowledge of Schematic and PCB design layout
Technical Skills
Knowledge of MOSFET, IGBT, Diode, Gate ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.00 LPA TO 3.00 LPA
Operator should known
(1) He should do casting through on lathe m/c(2) He should known about lathe tooling(3) He should use measuring instruments(4) he should do basic preventive maintenance of lathe m/c
well experienced
Responsibilities for lathe operator
Hand loads parts and/or material, hand feed tools as required
Inspects parts during production using various types ...
1 Opening(s)
5.0 Year(s) To 6.0 Year(s)
Not Disclosed by Recruiter
We have an opening for the post of Engineer - Quality Inprocess for a reputed Company for their Gurugram Location.
Roles & Responsibilities
Having Knowledge of IATF 16949:2016 documentation, MIS, PPAP & PFMEA.
To make inspection reports of all Moulding & Assembly parts.
To ensure product is being manufactured as per control plan/PDS.
To handle quality issues ...
3 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 3.60 LPA
JD for QC Engineer candidate.
Qualifications and Experience:• Diploma/Degree in Mechanical Engineering.• 2-3 years of experience in CNC machining.
Skills and Requirements:• Proficient in reading and interpreting technical drawings.• Strong knowledge of Geometric Dimensioning and Tolerancing (GD&T).• Excellent calculation and analytical skills.
Responsibilities:• Inspect and ensure the quality of CNC machined parts as ...