1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
Designation - Manufacturing Process - Engineering Fabrication
Company Name - The Hi-Tech Robotic Systemz Ltd
Industry - Automation Machinery Manufacturing
Website - http://www.thrsl.xyz/
LinkedIn Page link - (3) The Hi-Tech Robotic Systemz Ltd: About | LinkedIn
Location – Pune (Chakan)
Deputed to Customer’s Site (On Hi-Tech Payroll): CNH, Pune (A Fiat Group), Chakan Industrial Area, Pune
Required ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.80 LPA TO 3.00 LPA
JOB DESCRIPTION:
Metallurgic engineers work in metals and alloys in various industrial and manufacturing settings. They analyze metals and alloys to determine their physical and chemical properties and may also contribute to manufacturing through the development of new alloys for specific applications, including a lightweight but strong metal used in transportation. ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
8.00 LPA TO 10.00 LPA
Position: Process Engineer
Location: Jhagadia near by Ankleshwar
Experience: 5- 7 Years
Industry: Chemical
Responsibilities:
Process design engineering (Basic, detailing & Improvement)
Preparation of Material balance, PFDs, heat balance, and capacity calculations for a product.
Preparation & review of P&IDs as per standards. Generate documents for design projects including ...
1 Opening(s)
7.0 Year(s) To 10.0 Year(s)
20.00 LPA TO 20.00 LPA
Deputy Manager – Manufacturing Specialist Machining
Qualifications:Bachelor’s degree in engineering, Preferably Mechanical Engineering with 8 to 10 years of relevant experience in a Manufacturing Engineering in NPI and Production phase Ability to identify/track metrics and drive continuous improvement.Ability to interface with varied levels from Operators to Plant Management.Minimum 7 years’ experience in ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
Not Disclosed by Recruiter
Job Description :
1. Preparation of PFD, URS, FDS, Cycle Time Analysis, etc.
2. Calculation for Utilities, Peak Loads, Pipe / Pump sizing, Equipment capacity, and other accessories capacity/load/size
3. Preparation of P&ID, TS, DS, BOQ, Tender, and Validation documents (VMP, FAT, IQ, OQ, PQ, etc)
Basic requirement:
1. Knowledge of chemical engineering unit operations/processes
2. ...
2 Opening(s)
5.0 Year(s) To 10.0 Year(s)
10.00 LPA TO 15.00 LPA
Position: AM/Dy. Manger Process Engineering
Location: Ankleshwar, Gujarat.
Experience: 5-10 YEARS
Industries: Agro – Chemical/Chemical (MNC)
Responsibilities:
Candidate should have knowledge of Process engineering i.e. Basic and detail engineering
Should have hand on Process Engineering excellence of green filed and brown filed
Should have hands on Concept to commission.
Required Skills
Candidate should pass ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
20.00 LPA TO 25.00 LPA
Position: Manager Process engineering
Location: Ankleshwar, Gujarat.
Experience: 10-15 YEARS
Industries: Agro – Chemical/Chemical (MNC)
Responsibilities:
Candidate should have knowledge of Process engineering i.e. Basic and detail engineering
Should have hand on Process Engineering excellence of green filed and brown filed
Should have hands on Concept to commission.
Required Skills
Candidate should pass out from Premier Engineering institute i.e. ...
2 Opening(s)
3.0 Year(s) To 8.0 Year(s)
2.40 LPA TO 2.60 LPA
Require immediately for a leading STEEL INDUSTRIES and a highly reputed Group for shift incharge (Metallugy/B.sc) for Operation /Sponge Iron Division 100*2 tpd at SHIFT In charge of Operation Department of SID plant at raigarh Location ,
Analysis radiation temp from thermography & accretion profile inside kiln. Maintain the coal distribution inside the kiln.Experience ...
1 Opening(s)
20.0 Year(s) To 25.0 Year(s)
12.00 LPA TO 15.00 LPA
Require immediately for a leading STEEL INDUSTRIES and a highly reputed Group for General manager (Metallugy/B.sc) for Operation /Sponge Iron Division 100*2 tpd at SHIFT In charge of Operation Department of SID plant at Raipur Location ,
Analysis radiation temp from thermography & accretion profile inside kiln. Maintain the coal distribution inside ...
1 Opening(s)
23.0 Year(s) To 25.0 Year(s)
25.00 LPA TO 32.00 LPA
We are seeking a skilled Forging Process Engineer with comprehensive knowledge of open die forging operations, particularly in heavy forging, hydraulic pressing, and material handling. The ideal candidate will have a strong understanding of mechanical and hydraulic systems critical to open die forging, along with expertise in process optimization, quality ...