1 Opening(s)
2.0 Year(s) To 10.0 Year(s)
0.00 LPA TO 10.00 LPA
396 - Analsyt ops - Night Shift/UK Shift - 5L Experience - 2 to 4 years
560E - Sr Analyst Ops - UKShift Budget - 7.5L Experience - 3 to 6 years
587C - Team Leader - UK Shift Budget - 10.5L Experience - 6+ years
Responsibilities
Product knowledge of all OTC products (like Futures, Forwards, Swaps and Options)
Process knowledge of OTC ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 3.00 LPA
RESPONSIBILITY:-
Maintain TPM activity for PM pillar.
Preventive maintenance as per plan.
Attend all types breakdown in shift.
Why –why analysis on each breakdown.
Kaizen to improve MTTR, MTBF, Energy saving and Cost saving Kaizen.
PM and TBM improvement as per analysis of breakdown history.
Action taking on abnormality found during PM
Trouble shooting in all types of ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 4.00 LPA
Experience of teaching & programming an ABB, Panasonic robot.
Trouble-shooting & modification of Allen-Bradley Control Logix PLC programs, Mitsubishi PLC program.
Good knowledge of Allen- Bradley PLC5, SLC.
Working on servo motor and it's drive (Mitsubishi servo system).
Modification in electrical panel and PLC programs for eliminate the breakdown.
Looking over all the maintenance robots, ...
15 Opening(s)
Not Mentioned To 1.0 Year(s)
Not Mentioned TO 1.00 LPA
Job Description:
Attending AMC/CAMC call with the stipulated time.
Attending breakdown calls, complete the task in time.
Commissioning of new chillers,handing over work at site and fault finding.
Payment follow up for the spares/service.
Trouble shooting
Maintenance
Desired Profile:
JD: On site job for Machine/Engine/ Maintenance
Qualification: Should be ITI in Diesel Mechanic/Electrical/Automobile/Electronics
Salary :8k + Allowances after ...
8 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 3.00 LPA
JD for Embedded Developer
Requirement: 1to 2 year experience in Embedded development
Candidate should have strong analytic skills and should be proficient in "Embedded C", working experience on 8 bit, 16 bit and 32 bit microcontroller from PIC/ATMEL / MICROCHIP / TI / NXP and 32 bit ARM controllers etc.
The candidate is ...
1 Opening(s)
Not Mentioned To 2.0 Year(s)
0.96 LPA TO 1.20 LPA
We are looking Technical Support Executive for our Retail Product. The person will be responsible for Software Testing, Installation, Technical Support to customer, trouble shooting etc. He should able to handle our windows based product and provide technical support to the customers. This position is not for any BE or ...
2 Opening(s)
Not Mentioned To 1.0 Year(s)
1.20 LPA TO 1.50 LPA
Should have CCNA & CCNP certifications.2. Should have work knowledge on routing & switching. (Must)3. Should have work experience on Cisco Chassis Switches(6500/Nexus) & routers/Wireless.(Must)4. Knowledge on security products/Checkpoint firewall/F5/Websense/Palo Alto/Content Filtering(Must)5. Good trouble shooting skills on network as well as security domain.6. Wireless knowledge is a must, basic knowledge ...
5 Opening(s)
5.0 Year(s) To 7.0 Year(s)
2.50 LPA TO 3.00 LPA
Laptop Chip Level EngineerKey Skills: Laptop Chip Level Repairing, Laptop Repairing, Mother Board RepairJob Description: Chip Level Repairing of Laptop & Desktop, Laptop Repairing (Motherboard Repairing, SMPS, RAM,Hard Disk, Printer), Fault Diagnosis,Trouble Shooting
, Preparing the Reports for all the repairing related issue
Experience: Minimum 5 years experience
2 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.00 LPA TO 3.00 LPA
Job description
Carrying out the injection molding machine installation, commissioning and service including monitoring machine parts, trouble-shooting.
Setting up and trouble-shooting hydraulic valves and hydraulic cylinders.
Trouble-shouting minor electronic and electrical issues of machines.
Setting process parameters in machines for required product with minimized and reduced cycle time to utilize the maximum production output ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.00 LPA
Position Engineer - Molding
Job Description
Experience in Injection Molding
Handling Shift management
Trouble shooting Experience
minimum 3years o experience in manufacturing Injection molding process
Educational/Academic Qualification
B.Tech/B.E./Diploma or PG Diploma from CIPET
Preferred Industry
Toys/Automobiles/Durables/appliances
Experience (in years)
3 years of experience in manufacturing (injection molding process)
Preferred Institution
CIPET or equivalent
Below 30 age preferable