1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.16 LPA TO 2.40 LPA
A Control Room Operator (CRO) / Assistant Engineer manages, monitors, and optimizes industrial, power plant, or facility control systems to ensure safe and continuous operations. [1]
Job Overview
Role Type: Technical / Operations / Engineering
Reports To: Production Supervisor, Chief Engineer, or Plant Manager
Primary Objective: Monitor automated systems from a central control room, ...
- Cro
- Control Room Operator
- Central Room Operator
- Control Room Officer
- Cro Engineer
- Cro Assistant Engineer
- Assistant Engineer
- Asst. Engineer
- Junior Engineer
- Jr. Engineer
- Assistant Control Room Operator
- Control Room Engineer
- Plant Control Room Operator
- Process Control Room Operator
- Shift Control Room Operator
- Control Panel Operator
- Plant Operator
- Process Operator
- Shift Operator
- Operations Engineer
- Plant Operations Engineer
- Process Engineer
1 Opening(s)
8.0 Year(s) To 12.0 Year(s)
Not Disclosed by Recruiter
KEY RESPONSIBILITIES OF THE POSITION:
1). Adherence to Safety PPE by members & 5S on shop floor.
2). Daily work assignments to Shop floor operators.
3). Review daily Yield Target vs. Actual and take measures.
4). Review daily productivity Target vs. Actual and take measures
5). Handling daily quality trouble (Inhouse complaints, NC reports)
6). Preparation ...
7 Opening(s)
2.0 Year(s) To 15.0 Year(s)
22.00 LPA TO 30.00 LPA
Job Details:Role: OSD Production Operator (2nd Shift)Location: Cranbury, New JerseyDuration: Full TimeExperience: 2 - 15 Years
Must-Haves :Must have the following mandatory skill sets:* Must come from Oral Solid Dosage (OSD) pharmaceutical manufacturing* Hands-on Compression experience (tablet press setup, operation, in-process checks, troubleshooting)* Hands-on Granulation experience (wet or dry granulation, equipment ...
10 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 6.00 LPA
JOB DESCRIPTION – ANALYTICAL LAB CHEMIST
Document No. JD/QC/ALC
Position: Analytical Lab Chemist
Department: Quality Control / Analytical Laboratory Experience: 3–4 Years
Qualification: M.Sc. Chemistry / M.Sc. Analytical Chemistry / equivalent Industry: Dyes & Dye Intermediates / Chemical Manufacturing Location: Associated Dyestuff Pvt. Ltd., Saykha
Job Purpose
To perform accurate and timely chemical and ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
1 Opening(s)
2.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 3.42 LPA
Job Summary
The DM Plant Operator is responsible for the operation, monitoring and routine maintenance of the Demineralization (DM) Water Treatment Plant in a Captive Power Plant. The operator ensures continuous availability of quality DM water for boiler, steam generation and other plant requirements.
Required Skills
DM Plant operation
Water treatment process knowledge
Ion-exchange process
Resin ...
- Dm Plant Operator | Dm Plant | Demineralization Plant | Cpp Operator | Captive Power Plant | Water Treatment Plant | Ion Exchange | Resin Regeneration | Cation | Anion | Mixed Bed | Degasser | Ro Plant | Ph | Conductivity
- Tds | Boiler Feed Water | Chemical Handling | Power Plant | Steel Plant | Utility Operator | Shift Operator | Water Treatment Operator
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.92 LPA TO 2.40 LPA
A professional timekeeper typically requires a high school diploma or GED as a minimum educational qualification, alongside strong skills in data entry, basic accounting, and software proficiency.
Educational Requirements
Minimum: High school diploma or equivalent.
Preferred: Associate's degree or coursework in business administration, human resources, finance, or accounting.
Certifications: Certified Payroll Professional (CPP) or ...
- Timekeeper
- Time Keeper
- Timekeeping Executive
- Timekeeping Officer
- Attendance Executive
- Attendance Officer
- Attendance Coordinator
- Time Office Executive
- Time Office Assistant
- Time Office Incharge
- Hr Timekeeper
- Payroll Timekeeper
- Attendance Management
- Employee Attendance
- Daily Attendance
- Shift Attendance
- Shift Timing
- In Out Timing
- Biometric Attendance
- Punching Management
- Overtime Management
- Ot Calculation
- Shift Roste
50 Opening(s)
3.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 5.00 LPA
Department: Production Location: Manufacturing Plant Experience: 2–6 Years
Qualification: B.Sc/M.Sc Chemistry or Diploma/B.E./B.Tech Chemical Engineering
Key Responsibilities:
Execute daily/shift-wise production plans and batch scheduling.
Handle batch reactor, reaction, distillation, filtration, extraction & drying operations.
Monitor process parameters such as temperature, pressure, pH and reaction time.
Ensure compliance with SOPs, BMR, GMP/ISO and safety procedures.
Coordinate with QC/QA, ...
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
2.00 LPA TO 4.50 LPA
📌 Key Responsibilities
Handle day-to-day API production operations as per BMR/BPR and SOPs.
Operate and monitor reactors, centrifuges, dryers, filters and other process equipment.
Execute batch manufacturing activities as per approved procedures.
Monitor critical process parameters and ensure batch yield and quality.
Maintain proper production documentation and ensure ALCOA+ compliance.
Follow cGMP, SOP, EHS and safety ...
2 Opening(s)
9.0 Year(s) To 12.0 Year(s)
10.00 LPA TO 12.00 LPA
Position: Shift Incharge - Production
Location: Mundra - Kutch
Experience: 9 - 12 Years
Industries Chemical - MNC
Responsibilities:
To ensure adherence to production plan as per the batch cycle and check the production plan with respect to the schedule
To ensure production as per standard operating procedures
To manage and guide ...