1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
2.00 LPA TO 7.00 LPA
You will be responsible to Maintain the Utilities to support the Production Process of HDPE Jerry can manufacturing Unit.
Compression & Vapour Absorption Based Water Chillers, Air Conditioners, Air Handling Units, Cooling Towers, Air Compressors, Steam Boiler, Water Treatment Plant, Waste Water Treatment Plant, etc.
‘few pointwise roles and responsibility of utility ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.20 LPA TO 3.80 LPA
Job Title: Crusher Operator / RMHS Operator
Experience Required: 2 to 5 Years
Functional Area: Plant Operations / Production / RMHS
Industry: Steel / Sponge Iron (DRI) / Heavy Manufacturing
Key Responsibilities:
Operate and monitor primary, secondary, and tertiary industrial crushers (Jaw/Roll crushers) and associated feeding systems to process raw materials like coal, iron ore, ...
- Core Equipment: Jaw Crusher
- Roller Crusher
- Impact Crusher
- Vibrating Feeders
- Apron Feeders
- Vibrating Screens
- Belt Conveyors
- Hoppers
- Chutes. Operational Duties: Material Feed Regulation
- Crusher Gap Adjustment
- Jam Clearing
- Choking Prevention
- Pre-shift Inspections
- Shift Handover Logging. Safety & Maintenance: Loto (lockout/tagout) Procedures
- Preventive Maintenance Coordination
- Dust Suppression Systems
- Industrial Safety
- Ppe Compliance. Industry Environment: Raw Material Handling System (rmhs)
- Sponge Iron Plant (dri)
- Steel Manufacturing
- Heavy Processing Plant.
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
4 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.60 LPA
Key Responsibilities
Supervise and manage shift-wise production activities in the Ferro Alloys Plant.
Monitor submerged arc furnace (SAF) operations and ensure smooth furnace performance.
Control furnace operating parameters, including temperature, voltage, current and power consumption.
Ensure proper raw material charging, melting and alloy production.
Achieve shift-wise production targets while maintaining product quality.
Allocate duties to furnace ...
- Shift Incharge
- Shift Incharge Engineer
- Shift Supervisor
- Shift Officer
- Shift Manager
- Shift Engineer
- Plant Shift Incharge
- Production Shift Incharge
- Maintenance Shift Incharge
- Mechanical Shift Incharge
- Electrical Shift Incharge
- Operations Shift Incharge
- Plant Operations Incharge
- Production Incharge
- Maintenance Incharge
- Plant Supervisor
- Operations Supervisor
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
5.50 LPA TO 10.00 LPA
Job Summary: We are looking for an experienced Electrical & Automation Engineer to manage electrical systems, automation, and drive-related activities in a manufacturing plant. The role will involve ensuring smooth operation, troubleshooting, maintenance, and improvement of electrical and automation systems.
Key Responsibilities:
Handle AC/DC drives, VFDs, PLCs, HMIs and industrial automation systems.
Troubleshoot ...
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.50 LPA
Job Location: Dahej / Gujarat Experience: 3–5 Years Qualification: Diploma / B.E. – Chemical / Environmental preferred
Short JD:
Operate and monitor ZLD, ETP, RO, MEE & ATFD systems.
Monitor wastewater treatment parameters and ensure smooth plant operation.
Handle ZLD plant operations, troubleshooting and preventive maintenance coordination.
Maintain daily operating logs, chemical consumption and process ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.00 LPA
Position: Production Supervisor
Location: Sarigam near by Vapi
Experience: 1 - 3 Years
Industries: Chemical
Responsibilities:
Supervise day-to-day production activities as per production plans and SOPs.
Monitor chemical manufacturing processes, batch operations, and plant parameters.
Ensure proper handling of raw materials, chemicals, and finished products.
Operate and monitor equipment such as reactors, centrifuges, filters, ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
2.20 LPA TO 3.00 LPA
Job Summary: Responsible for planning, supervising and executing civil construction, maintenance and infrastructure works at the plant/site while ensuring quality, safety, cost and timely completion.
Key Responsibilities
Plan and supervise civil construction and maintenance activities.
Prepare and review BOQ, estimates, drawings and material requirements.
Monitor RCC, structural, foundation, flooring, drainage and road works.
Coordinate with ...
1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
25.00 LPA TO 30.00 LPA
AGM / DGM – Injection Moulding Production
Industry: Automotive Components Manufacturing
Department: Production / Operations
Location: Waluj MIDC
Salary Budget: Up to 30 LPA (Commensurate with experience)
Experience Required: 15–20 Years
Job Purpose
The AGM/DGM of Injection Moulding Production will lead plant operations, optimize cycle times, and manage plastic injection moulding shop floors to achieve production targets. ...
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.00 LPA
Lab Engineer / Gas Chromatography (GC) Technician
📍 Location: Ghaziabad💼 Experience: 4–5 Years🎓 Qualification: Diploma / B.Tech / M.Sc. in Chemistry, Chemical Engineering, Instrumentation, or a relevant field
About the Role
We are looking for an experienced Lab Engineer / Gas Chromatography (GC) Technician to operate, maintain, troubleshoot, and ensure the proper functioning of ...