1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 3.60 LPA
Job Description
27/04/24
HPS/2024/267
PPD Engineer
Male
1
2 to 3
DME/BE/BTECH -Mechanical
1) B.E Mechanical - 01 nos. (Male Only)
With 3 years of Exp.
1.1 Ensure proper production planning to meet 100% dispatch plans.
1.2 Manufacturing feasibility study of new drawings.
1.3 Preparation of stage 1st drawings.
1.4 Preparation of DOPC drawings.
Develop Production Plan & detailing all tasks to meet predicted completion date .Monitor Production and raw material cost. Prepare report about ...
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 4.20 LPA
Job Description
27/04/24
HPS/2024/263
PPC Engineer
Male
2
2 to 3
DME/BE/BTECH -Mechanical
1) B.E Mechanical - 02 nos. (Male Only)
With 3 years of Exp.
Develop Production Plan & detailing all tasks to meet predicted completion date .Monitor Production and raw material cost. Prepare report about productivity processes.Monitor production status and ensure timely delivery.
Production Planning, Co
Micrometer , Vernier Caliper ,Try Square, Pie Tape,
Manpower handling ,
Shop Floor Housekeeping,
Team Player & ...
1 Opening(s)
8.0 Year(s) To 14.0 Year(s)
8.00 LPA TO 10.00 LPA
JOB DESCRIPTION:
Knowledge about PPAP DocumentsMeasurement System AnalysisGauge R&RKnowledge of measuring instruments is limited to vernier caliper, Scale, Gauges and micrometre
knowledge of 8dknowledge of Control plan, PFMEA, PFDProblem solving methods such as 8D, why why analysis, fishbone diagram,Communication with suppliersCommunication with customer,Engineering drawing analysisAPQP,PROCESS ANALYSISPRODUCT ANALYSIS.
6 Opening(s)
0 To 0
0.00 LPA TO 2.40 LPA
Quality Inspector
Diploma Trainee Engineer.
Diploma in Mechanical ( 1 st Class throughout in education)- Freshers- quality control.Please Note that-Male candidates will work in 1 st & 2 nd shifts.Female candidate has to work in general shift.
Salary- Rs. 21200/- ( monthly Gross)- deduction as applicable as per Company norms.Job Description which will ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
8.00 LPA TO 10.00 LPA
CMM-CALYSPO (Windows based software used in 3Dco-ordinate measurement m/c for inspection) Uses Roughness tester Mahr model, Used to measurement of surface roughness parameters and Counter parameters of components of Engine parts
Monitoring and controlling of receipt material inspection (Machining, casting, Sheet metal, Molding & Rubber components) and also approved the inspection ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
Qualification: Diploma in Mechanical or ITI or Any GraduateExperience: 3 to 5 yrs in VMC Machine operating.Work location: Vasai East in Mumbai
Job description:Exp of how to take offset from jobExp in all quality instruments.(eg vernier caliper micromiter, bore gauge etc)knowledge of using boring bar, cutter & drillsHandling the cutter & ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.60 LPA TO 4.50 LPA
RESPONSIBLE FOR REVALIDATION SYSTEM AS PER CUSTOMER REQUIREMENT FOR FINAL AND CHILD PART
RESPONSIBLE FOR PROCESS INSPECTION AND FLOW OF PARTS IN EVERY PROCESS WISE
ALSO DO VENDOR AUDIT AS PER CONTROL PLAN
RESPONSIBILITY OF PART LAYOUT INSPECTION ON CO-ORDINATE MEASURING MACHINE (CMM).
CALIBRATION AND MAINTAINANCE OF INSTRUMENTS (PROFILE PROJECTOR, VERNIER ...
4 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.20 LPA
1) B.E Mechanical - 04 nos. (Male Only)
With 3 years of Exp.
CTC - 3.25L per year.
Develop Production Plan & detailing all tasks to meet predicted completion date .Monitor Production and raw material cost. Prepare report about productivity processes.Monitor production status and ensure timely delivery.
Production Planning, Co
Micrometer , Vernier Caliper ,Try Square, Pie Tape,
Manpower handling ,
Shop Floor Housekeeping,
Team Player & Self motivator.
Lean Manufacturing, TPM, ANDON
Takt time, ...
3 Opening(s)
1.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 4.00 LPA
Relevant experience working as Quality Engineer.
Good knowledge of VMM (VIDEO MEASURING MACHINE ) .
Knowledge of testing machine like, tensile testing machine, muffle furnace, specific gravity and hardness tester.
Strong knowledge of Quality – Understanding of Quality Requirements on the products Geometrical Tolerances, Inspection layout Handling of Measuring equipment’s like Height Gauge, ...
2 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.04 LPA
Hiring for Sankaj Engineering pvt ltd .
Position: Quality Engineer
Qualification: BE - Mechanical / Diploma Mechanical.
Work Experience: 1-2 year in Quality department .
Work profile:s
Cndidate having 1-2 yrars Expirance in IN-Process Quality Engineer. experiance of CNC Line instruments
Location: Walij MIDC Area, Aurangabad.
if you are interested kindly send your updated CV on career@paradiseplacement.co.in