1 Opening(s)
0 To 2.0 Year(s)
1.00 LPA TO 2.00 LPA
knowledge about Selection of tools according to operations
Knowledge about Operating and ProgrammingCNC &VMC machines.
Knowledge aboutJob settingCNC &VMC machines.
CNC & VMC programming & of Fanuc and Mitsubishi controls etc.
2D Programming on VMC.
All Machine Shop Dept. Problem-solving
Programming of new parts
Managed and supervised CNC & VMC Operators.
Programmed and set up machines to produce ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
Job description
Wirecut Machine Operator Cum Programmer
Male
1
2 to 5
ITI Fitter/DME
Prepare CNC Wire Cut machine programmer operate.
Supervise the machine executing the task and make any necessary adjustments to produce better results.
Inspect and measure finished products and compare with requirement to determine if the process has been completed properly.
Check and maintain machinery daily ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
4.80 LPA TO 5.60 LPA
Experience Necessary
In Engineering Industry involved in CNC ( Turning Centre and VMC) and Conventional Machining, Welding, Profile cutting, Bending, Grinding.
General
Should be best in obtaining Planned Results from the shop floor resources.
Should be good communicator – both Verbal and Written skills including Production Reports.
Should be able to handle the responsibilities ...
5 Opening(s)
15.0 Year(s) To 25.0 Year(s)
Not Disclosed by Recruiter
We're hiring for the following position, kindly find details.
Position: Sr. Manager/ Manager
Role: Electrical Maintenance
Experience: 12+years
Responsibilities:
Trouble shooting of CNC machines, robotics, editing & modification of system
Familiar with all CNC versions - Fanuc, Siemens, Mitsubishi and CNC system
Ladder logic
Fanuc M10,M20 & M30 robo controllers
Program reading
Induction hardening equipment
QMS tools - IATF & Safety ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 3.00 LPA
Hiring for Maintenance Engineer in Aurangabad.
Designation: Maintenance Engineer
Education: DME / B. Tech Electrical/ Diploma Electrical
Must Required experience - Cnc Machine Shop
Experience: Min 03 Years
Responsibility
Total machine shop maintenance, breakdown attend, & preventive maintenance
Work done on CNC Machines like LATHE, VMC, Machine(Makino, AMS, Jyoti), Etc.
Route Cause Analysis Report making.
Preventive Maintenance check sheet up-gradation.
Electrical Maintenance Documentation ...
2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.80 LPA TO 3.00 LPA
Hiring for Cutting Tools Manufacturing Industry
Position: Production Supervisor 02 (M)
Experience: - Min 3+ year in Production Surface Grinding
Qualification: - Diploma
Salary: - 23,000/- to 25,000/-
Job Profile:
CNC, VMC Setting & Programming
Proper Programmer as per drawing
New fixture develop as per requirements
Rejection control and Problem-solving
Provided monthly and daily production plan as per the dispatch schedule
Preparation ...
2 Opening(s)
2.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 2.40 LPA
Position: VMC Operator
Education: ITI / DME
Experience: 2 to 5 Years of experience in VMC Operating
Number of Vacancies: 02
Salary : upto 2.40 Lac(s)
Job Profile:
CNC Programming of Fanuc Control System
VMC Programming of Fanuc control system.
Operate VMC and CNC Machine.
Job set up.
Daily production report.
OperateCNC and VMC machine of the Fanuc control system.
Job Location: Chikalthana MIDC, Aurangabad
for more ...
2 Opening(s)
2.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 2.40 LPA
Position: VMC Operator
Education: ITI / DME
Experience: 2 to 5 Years of experience in VMC Operating
Number of Vacancies: 02
Salary : upto 2.40 Lac(s)
Job Profile:
CNC Programming of Fanuc Control System
VMC Programming of Fanuc control system.
Operate VMC and CNC Machine.
Job set up.
Daily production report.
OperateCNC and VMC machine of the Fanuc control system.
Job Location: Chikalthana MIDC, Aurangabad
for more ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
6.00 LPA TO 7.00 LPA
Position: Maintenance Head for Robotic Weld Shop
Salary Package: 6 to 7 LPA
Experience: Min 6 years of Experience in Press, Fabrication & Paint Shop - Welding robots, PLC, CNC, Drives, Hydraulics, Pneumatics Maintenance.
Qualification: Graduate in Engineering (Optional)
Job Profile
Planning – Project, Plant & Machinery, Equipment, Utility services.
Preventive Maintenance of machines. Ensure ...
3 Opening(s)
1.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.40 LPA
Hiring for Design Engineer
Company Profile: Gradually the company expanded its customer base to include Electrical Switchgear industries.
It was in the year 2004, that the company expanded its product range to include electrical enclosures like MCB distribution boxes, Concealed metal boxes and main switches.
Today, after 25 years the company has grown to a full-fledged manufacturing facility of ...