1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
15.00 LPA TO 22.00 LPA
Job Description Summary
This opening is for a design role in 9X HPC module within 9X Engineering section at Aerospace Bangalore Engineering Center. Activities contributing to the design and development of products, solutions and systems. Includes activities linked to technical improvement of existing products and components. You will be required to ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
18.00 LPA TO 20.00 LPA
Position: Utility Head
Location: Sachin- Surat
Experience: 15- 20 Years
Industries: Chemical
Responsibilities:
Controlling and Maintaining Schedule of checklist of: (Chilling Plant, Boiler, Thermotank, Compressor, Cooling tower, RO plant)
Chilling Plant of All Units (GAS, Oil level, AMC etc.)
AMC Coordination with utilities with its applicability and Its paperwork.
Identifying ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
15.00 LPA TO 20.00 LPA
This opening is for a design role for 9X HPC module within 9X Engineering section at Aerospace Bangalore Engineering Center. Activities contributing to the design and development of products, solutions and systems. Includes activities linked to technical improvement of existing products and components. You will be required to work collaboratively ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
2.00 LPA TO 3.00 LPA
Job description
Should be perfect in welding/ fitting/ alignment as welder/Fitter.Fitting for utility equipment like compressor, cooling tower, DG Set, Blower, Heat Exchanger, Material handling equipment.
Required Candidate profile
Candidate Should have at least 5 years of experience in fitter and have worked as foreman.
Job description
Should be perfect in welding/ fitting/ alignment as ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
15.00 LPA TO 22.00 LPA
Job Description Summary
In this role, the design engineer will be part of the Advanced Mechanical Design team and will contribute towards maturation of the compressor technology for the next generation engines. Engineer will work on the design of Airfoil hardware of the demonstrator and tech maturation vehicles.
Job Description
Roles and Responsibilities
Execute ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
Urgent Requirement of AC Technician at Reputed Pipe Manufacturing Industry at Raigad M.H. Location. Installing, servicing, troubleshooting & maintenance work Split AC & package ac, Ducted ac, split ac, casse teac's Compressor replaced, brazing, cable line work. Make repairs to hotel air conditioning system: change filters, clean coils.
Urgent Requirement of ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.50 LPA TO 3.50 LPA
Important Keywords :
Rolling Mills , Tube Mills, Press Maintenance , EOT Cranes & PLC
Knowledge of PLC, AC/DC motors, Power Transformer , Circuit Breaker, HM-Serve Motor, DC Panel, APFC Panel, Rolling Mills , Tube Mills, Press Maintenance & EOT Cranes etc.
Candidates must have experience in Manufacturing units equipped with Rolling Mills ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 2.50 LPA
ITI Refrigeration (RAC)- 2 to 3 years experience in FMCG or Manufacturing ITI Fitter - 2 to 3 years experience in FMCG or Manufacturing Experience : ITI Fitter and ITI RAC candidates must have hands-on experience in operation and maintenance of Cooling systems like Cooling tower, Chilling Plant, Compressor, pump ...
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
4.00 LPA TO 5.50 LPA
Position: Executive - Utility
Location: Jhagadia near by Ankleshwar
Experience: 2 - 4 Years
Industries: Chemical
Responsibilities:
Preparation, review, implementation accountability of HVAC/Air/water other utility qualification relevant activities
Strategize on maintenance, work instruction and methods
Establish maintenance strategies to install and commission equipment
Create plant preventative maintenance procedures
Plan routine maintenance ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.50 LPA
Role Purpose: This position is responsible for Handling Maintenance General shift activities and to ensure properPreventive maintenance activities and monitoring the systems are carried out on time to ensure the smoothrunning of PlantsSKILLS:1. RCA, CAPA and 8D analysis2. RCM study3. Troubleshooting
KNOWLEDGE:1. Machine maintenance and breakdown maintenance2. PM planning and scheduling3. ...