1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
12.00 LPA TO 18.00 LPA
Position: Plant Head - Robotic Shop
Education: DME/ BE Mechanical
Experience: Min 12 Years with Manager level at least 5 Years in Automobile industry Fabrication, robotic
Description:
1. Production: To monitor and maintain RM stock on a daily basis, To prepare Production Plan (Daily, Weekly, Monthly) considering plant capacity, To ensure production as per plan
2. Quality: ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 4.00 LPA
Candidate should have ITI qualification and 3 year experience as Fitter in a large TMT Bar Mill.
5+ years of relevant experience in ROLLING MILL as a mechanical Fitter Should be able to design tools and should be result oriented with time limit.o Minimum 3 to 7 years of Industry experience ...
2 Opening(s)
1.0 Year(s) To 5.0 Year(s)
1.40 LPA TO 2.40 LPA
Must have Good knowledge in operating molding machines.- Have to handle production activities and mold trials and setting.- Have to handle material stocks.
-Machine details 650 T (JSW)m 90 MM Screw,Shot Weight 3190
-Machine Details 450 T (Kaptiva 900 MM Screw, Shot Weight 1800
Sets machine controls, regulating molding temperature, volume of plastic, ...
5 Opening(s)
2.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.40 LPA
At machine start up1) Ensure the Labels for the next job is perfectly matched and ready 2) Make sure material for next 2 jobs is ready 3) Set up machine as per the specification sheet a. For Polytype and Flexo use recipes (to be developed) b. For other machines use ...
4 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Hiring for the post of Production Shift Supervisor
Experience: Min 3 Years in CNC Machines Shop
Education: BE Mechanical
JOB PROFILE:-
Daily work management (D.W.M.)and shift handling
Production planning and problem-solving
Rework, Rejection, and line through back monitoring.
Continuous improvement in the process to improve the quality point.
Wey Gauges periodic status monitoring on a monthly bases.
Cost-saving ideas for the improvement of the department.
Looking at the quality-related PM charts.
Ensure 1S-2S on the shop floor.
Daily KAIZEN for improving the process.
KEY SKILL:-
Knowledge about CNC Programming & Supervision.
Knowledge of operating and setting of SPC PM Chart.
Knowledge of RADIAL DRILL & another manual machine.
Knowledge of fixture setting.
Knowledge of MAPAL TOOL & TOOLING Setting.
Knowledge of Special Activities of rework of Crankshaft.
Job Location: Supa MIDC, Ahmednagar
if you are interested kindly send your updated CV on career@paradiseplacement.co.in
for more details call on 9765567505
4 Opening(s)
2.0 Year(s) To 4.0 Year(s)
1.44 LPA TO 2.40 LPA
The candidate should ready to physically work on
High Precision CNC Machines like MAZAK, MAKINO, AGIE CHARMILL, HAAS, etc.
Key Skills:
ITI/DME
Desired Candidate Profile:
ITI/DME
Locations:
Silvassa
Number Of Openings:
6
Required Experience:
Maximum 2 to 5 year(s)
Relevant Experience:
2 years
Salary Range:
INR 9000 - 15000 8hours duty
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
Hiring for Spring Manufacturing Industry
Position: Electrical Maintenance Engineer
Education: Diploma / BE Electrical
Experience: 2 to 5 Years in the Machine shop, spring
Salary: up to 18,000/- PM
Job Responsibilities : -
Attending all Breakdown & Trouble Shooting in the shift.
To deals with any modification of the machine.
Responsible for analyzing data of equipment control ledger for maintenance cost reduction.
Updating documents such as PM Check sheet, M/C History card, and M/C equipment control
Ledger, B/D History card, critical spare part lists, Power consumption report, Diesel consumption report
Maintenance of Hot water Generator, ETP, Electroplating, Powder Coating M/C, Pretreatment Line, Fatigue M/C, CNC Coiling ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
Hiring for Spring Manufacturing Industry
Position: Maintenance Engineer
Education: Diploma / BE Mechanical
Experience: 2 to 5 Years in the Machine shop, spring
Salary: up to 18,000/- PM
Job Responsibilities : -
? Attending all Breakdown & Trouble Shooting in the shift.
? To deals with any modification of the machine.
? From mechanical side deals with shafts, gearbox, water pumps and machine assembly.
? Working ...
1 Opening(s)
8.0 Year(s) To 15.0 Year(s)
6.00 LPA TO 9.00 LPA
The Plant Manager’s primary responsibilities include leading the operation and maintenance staff, the daily management and coordination of plant operations including production, logistics and maintenance while ensuring compliance with all labor, safety, environmental and corporate policies and regulations. This is a hands-on position that is responsible for productivity maximization.Responsibilities:Production• Plan, ...
1 Opening(s)
8.0 Year(s) To 15.0 Year(s)
6.50 LPA TO 7.50 LPA
Maintenance1. Ensure zero breakdowns and 100% preventive maintenance of machines.2. Zero re occurrence of failures.3. Coordination & follow up with key external vendors and maintenance consultants.4. Coordination with Process for planning of electrical & mechanical jobs.5. Execution of electrical & mechanical activities within budgeted expenses.6. To educate & implement all ...