35 Job openings found

1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
2.50 LPA TO 3.50 LPA
Diploma or BE in Mechanical or Production with 4 to 8 yrs experience in foundry /casting, machining, forging/forge components.Job Profile -1)Exp in pre-dispatch inspection of automobile forging/forge, machining, foundry /casting components.2)Exp in documents preparation like pre-dispatch inspection reports, PPAP, FMEA, MSA, SQC and sample inspection3) Should able to read engineering drawing ...
10 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.50 LPA TO 4.20 LPA
Monitoring of Injection moulding m/c. Hourly basis DPR updated. m/c abnormality find out & take proper action . Process parameter setting. Responsible for all check sheet and report . Responsible for part wise document on m/c. Handling the manpower according to production planning. Monitoring of Down Time and reduce it and standardize for every Break Down. Responsible for ...
3 Opening(s)
0 To 1.0 Year(s)
1.00 LPA TO 1.44 LPA
Job Description:   1.R&D Dept- 01 Male Exp: 0-2 Yrs  Job profile and responsibilities:   •New Business case study like technology roadmap meeting / RFQ meeting. •Competitor product study like design concept, material, Bill of Material and developing new ideas.  •Preparation of Material shortage sheet and make planning accordingly and communicate with the purchasing team.  •Preparation of Proto samples and meeting with customers, sharing all the details, taking the requirement and fulfill accordingly. •Submission of R&D proto sample report to the customer and taking approval for SOP. •Arranging and leading pre-handover and handover meetings. •.Responsible for planning & developing new product as per customer requirement. •Monitoring PFS, FS, MDS and APQP sheet.   2.QMS Dept- 01 Male  Exp: 0-2 Yrs  Job profile and responsibilities:   Handles TPM , TS & Quality Documents as per Customer Requirement . Handles Customer Complaints Preparing Presentations of Rejection Analysis and presents it to the management. Conducting IPO & Process  Audits in order to continually refine the process ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.00 LPA
 CMM(Co-ordinate Measuring Mchine)  Responsible for monitoring in-process inspection and final inspection. Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc. Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
2 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.50 LPA TO 4.00 LPA
CMM(Co-ordinate Measuring Mchine)  Responsible for monitoring in-process inspection and final inspection. Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc. Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.00 LPA
QA-Sr. Engineer (3 requirements) Working as a MR for QMS (TS 16949:2009). Implementation of customer specific requirements& QMS in all functions of the plant. Conducting Internal Audits & Implement all actions as per the improvement plan. Analysis of Non conformance’s for Corrective/Preventive actions. Daily & Monthly rejection analysis. Customer complaint handling. Analysis & Actions for In-house Rejection, Rework, Scrap, ...
1 Opening(s)
8.0 Year(s) To 15.0 Year(s)
4.50 LPA TO 6.00 LPA
Hand on experience in production, quality and maintenance related task, production & controls. Monitoring and supporting for various new projects assigned to team members. Setting of initial machine operation parameters for the start-up & shutdown. Making and ensure adherence of preventive maintenance schedule of machines. Analysis breakdown, diagnosis fault, poor performance of machine & quality defects. Chillers, MTC, cooling tower, compressor, dryer, dehumidifier, water pumps, Air dryer, Diesel Generator. Capable to new mould, new colour ...
1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
20.00 LPA TO 30.00 LPA
Qualification: BE in Plastic / Mechanical OR PG in CIPETExperience: 15 to 25 years in manufacturing of Automobile plastic injection molded parts.Industry Exposure: Must be from Auto industry Tier 1 or Tier 2Team size handling: 10 - 15 staffs and around 500 workers (Both regular and trainees) Candidate Requirement:Must have Manufacturing exposure ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.00 LPA TO 4.00 LPA
Experience Diploma or BE Mechanical knowledge for Manufacturing Process, Engineering concepts should be clear. must have experience in working on shop floor. Achieving desired Productivity targets within target rejection percentage. Reducing number Of manpower by going for automation and other Lean techniques. Reduce production cost and batch time Daily Production Report Capacity analysis Daily Machine Check Record Material Consumption ...
2 Opening(s)
4.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.00 LPA
Job Details 4 to 7 Yrs. Experience Diploma or BE Mechanical engineer should have knowledge for Manufacturing Process, Engineering concepts should be clear. must have experience in working on shop floor. Achieving desired Productivity targets within target rejection percentage. Reducing number Of manpower by going for automation and other Lean techniques. Reduce production cost and batch ...

Drop Your CV

We will consider your Profile for future Jobs

Submit Profile