1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
250000.00 LPA TO 400000.00 LPA
Kindly source the candidates for Process Engineering ( Senior category ) of Min.2 years’ experience of B.E Mechanical Engineering or 4 year experience DME
Required Skills:
Process Optimization & Validation, Setup Approval Sheet Documentation.
2. Preparation of Work Instructions to Various Operation Activities & Quality checklists catalogue.3 Designing of Jigs & Fixture. Cad ...
1 Opening(s)
14.0 Year(s) To 20.0 Year(s)
Not Disclosed by Recruiter
Qualification: BE in Mechanical, Automobile, Production EngineeringExperience: 14 to 20 years of experience from Press shop, Sheet metal plant, Automobile fabrication assembly plant.Work location: Shirwal in Pune
Job Responsibilities:Manage the quality control processReview and update for PPAP, PFD, PFMEA, Control Plan and Process inspection standards.Ensuring continuous improvement in process and product quality ...
1 Opening(s)
8.0 Year(s) To 15.0 Year(s)
4.00 LPA TO 5.00 LPA
Post: Production Manager
Education: BE / DME Mechanical
Experience: 8 to 15 years in Hot Press forging (Press 1600ton, 2500ton, 1300ton)
Salary Up to 6.00 LPA
Job Profile :
Good Knowledge of Hot Press forging (Press 1600ton, 2500ton, 1300ton)
Monthly and Daily production planning as per given schedule by the marketing department.
Managing the Production / Manufacturing / ...
1 Opening(s)
7.0 Year(s) To 8.0 Year(s)
7.00 LPA TO 8.00 LPA
Position: Asst. Manager - Production(Moulding)
Location: Vapi
Experience: 7 - 8 Years
Industries: Automobile
Responsibilities:
Responsible for reducing rejection level below from the limit set by management.
Responsible for ...
1 Opening(s)
6.0 Year(s) To 8.0 Year(s)
Not Disclosed by Recruiter
Experience Required -
New product process development; feasibility study- IS A MUST
Assembly tool design must- how to design tool from beginning to end.
Experience in documentation- PFMEA, WI/SOP, flow chart
Responsibilities
Develop new processes, assembly tools, create documents like PFMEA, flow charts, WI/SOP, Control plan.
Plan & access the feasibility of new & running projects.
Experience ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
Not Disclosed by Recruiter
Safety
To monitor and implement safety norms to minimize accidents.
Standardization of systems
Monitoring, implementation and to maintain quality assurance systems in existing and new process/product/activity in Chemical Lab (QMS/EHS/EnMS)
Instrument management, calibration & AMC.
Closing NCR raised in internal & external audits.
Process Product Quality Assurance, Compliance & Audits
To conduct sampling inspection & testing as ...
1 Opening(s)
3.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
Roles & Responsibilities:· Responsible for Production documents verify on daily basis(P verification, Welding strength verify(DT/NDT), Parameter verification, Down time data monitoring, Production data monitoring.)· Responsibility for production planning· Knowledge of Cost of Poor Quality.· Implementation knowledge in Poka-yoke and responsible for Poka-yoke audit plan.· Counter measures through process for direct ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
RESPONSIBILLITIES
Executes the specific inspections on materials, equipment and construction/installation activities on site.
Issues the relevant Quality Records and, when necessary, write and send to Quality Control Supervisor non-conformances reports.
Checks the preparation of foundations.
Checks the correct preparation of reinforcements.
Checks the certifications regarding element mixes. LASTM test, chemical analysis, grain size analysis.
Monitors atmospheric ...
1 Opening(s)
2.5 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
Job Title :Project Engineer
Division/ Functions : RFQ Cell Dept
Direct reporting To : DGM
Qualification : B.E (Mechanical) / DME / ITI
Experience: 3-5 Years
Key Responsibilities
Technical Feasibility Documentation
1. Part manufacturing feasibility, machining feasibility, forging manufacturing feasibility, quantum raw materials required. Defining packaging standards, DPAR- design product availability review.
New Product Production Supervision
1. Supervising the production ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description:-
HPS/2023/614
PPC Executive
Male
1
1 to 3
BA/BCom/ITI Mech/DME
Develop Production Plan & detailing all tasks to meet predicted completion date .Monitor Production and raw material cost. Prepare report about productivity processes.Monitor production status and ensure timely delivery.
Production Planning, Control
Process Control, NCR, CAPA.
5S, Safety, KAIZEN, SOP,
Micrometer , Vernier Caliper ,Try Square, Pie Tape,
Manpower handling ...