1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.16 LPA TO 2.40 LPA
Job Description
27.06.24
HPS/2024/379
Bunching Operator
Male
3
2 to 5
DME
Bunching/Stranding Machine Operator
A. Knowledge of bunching/stranding machine operations B. Minimum 5 years of experience in the same line
1. Strictly abide by various operating procedures to ensure safe production.
2. According to the lay length requirements specified by the process, install the corresponding pulleys and lay length gears ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description
25.06.24
HPS/2024/375
Bunching Supervisor
Male
1
2 to 5
DME
1. Bunching/Stranding Machine Supervisor A. Knowledge of bunching/stranding machine operations B. Minimum 5 years experience from cable industry C. Qualification - ITI/Diploma and above D. Vacancy - 1
1. Strictly abide by various operating procedures to ensure safe production.
2. According to the lay length requirements specified by ...
3 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
Job Description
25.06.24
HPS/2024/374
Bunching Operator
Male
3
2 to 5
DME
Bunching/Stranding Machine Operator
A. Knowledge of bunching/stranding machine operations B. Minimum 5 years of experience in the same lineC. Qualification - 10th passD. Vacancy - 3
1. Strictly abide by various operating procedures to ensure safe production.
2. According to the lay length requirements specified by the process, install ...
2 Opening(s)
2.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 4.00 LPA
Should able to perform and supervise following routine tests of general chemical nature:-
Acidic/Alkaline strength of various solutions
Preparation of solutions for standardization
To find metal content such as copper, iron etc. of powders
To perform all tests on water i.e. pH, TDS, TSS, harnesses, alkalinity, BOD, COD etc.
Should have very good knowledge of ...
5 Opening(s)
5.0 Year(s) To 8.0 Year(s)
20.00 LPA TO 26.00 LPA
Job Title: Communication Design Engineer
Education Qualification: Bachelor’s degree in Electronics and Communication Engineering
Job Responsibilities:
Ø Responsible for design, coordination, and execution of Data and Telecommunication system activities on the project.
Ø Prepare material takeoff to support project estimation.
Ø Coordinating with clients, subcontractors, project manager and Other Discipline Engineers.
Ø Prepare, Review and approval of material submittal and shop/fabrication drawings.
Ø Prepare, ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.16 LPA TO 2.40 LPA
Description:
Description:
Need to have good knowledge & working experience of tooling.Need to have good experience in drilling & tapping.Responsible for assembly of Dynamometers.
Need to have good knowledge & working experience of tooling.Need to have good experience in drilling & tapping.Responsible for assembly of Dynamometers.
Responsible for assembly of Dynamometers.
1) Taps refining furnaces ...
1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
1.44 LPA TO 1.80 LPA
Description:
Our company is looking for a highly talented welder to join our dynamic team. We’re seeking a hardworking professional who likes meeting challenges and surpassing client expectations. Your chief responsibilities will include interpreting designs, monitoring machinery, and assessing welded components.
Interpret blueprints, drawings, and measurements to plan layouts.
Weld small and large ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.60 LPA TO 5.40 LPA
25.07.25
71915
HPS/2023/759 HPS/2025/441
Metallurgical Engineer
Male
1
2 to 5
DME/B.E Mechinical-Metallurgy
8 Hours
Metallurgists study the properties of metals and then apply their findings to practical applications, such as metal production. They work with a range of metals including copper, precious metals, iron, steel, zinc, and aluminum alloys. Metallurgists can work in a number of areas including ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
TOOL DESIGN STAMPING
LOCATION KOCHI- Candidate will be based in FCI cochin site
Experience: 8 - 10 years
Education: Post Diploma / Diploma in tool design or Tool & die making from (NTTF /IGTR / GTTC)
ROLE-
- Initial study of product drawing / Strip Layout / Assembly drawing- Mfg. feasibility as per drawing requirement ...
1 Opening(s)
3.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.16 LPA
Responsibilities:
Interpret blueprints, drawings, and measurements to plan layouts.
Weld small and large components such as copper plumbing, beams, and pipelines.
Use specialized machinery for industrial welding and oversee machines that perform the same job.
Maintain and repair all machinery.
Assess welded surfaces, structures and components to identify errors.
Follow and enforce strict safety regulations such ...