1 Opening(s)
6.0 Year(s) To 7.0 Year(s)
10.00 LPA TO 16.00 LPA
Job description
Observation of Lab trial at R&D and Pilot plant for process optimization & scale up
Preparation of Mass balance, energy balance for the R&D & pilot plant process.
Understanding & Preparation of PFD, P&ID & Cause & effect matrix for process.
Preparation of Standard operation procedure, Operation control Philosophy document for plant ...
6 Opening(s)
2.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 11.00 LPA
Job description
Observation of Lab trial at R&D and Pilot plant for process optimization & scale up
Preparation of Mass balance, energy balance for the R&D & pilot plant process.
Understanding & Preparation of PFD, P&ID & Cause & effect matrix for process.
Preparation of Standard operation procedure, Operation control Philosophy document for plant ...
40 Opening(s)
5.0 Year(s) To 20.0 Year(s)
Not Disclosed by Recruiter
Review of procedures and basis for the job. • Ensure that all work performed complies fully with all applicable codes, regulations etc., as well as company design standards & client requirements or in other words, design control.• Procedure and basis for the project.• Procedures for interface control with other departments.• ...
2 Opening(s)
3.0 Year(s) To 7.0 Year(s)
4.00 LPA TO 6.00 LPA
Experience in Process mapping, cost reduction, all manufacturing activities on pilot scale Troubleshooting, Process improvement managing process parameters so as to improve quality of product, minimizing time cycle.
Experience in root cause analysis -Identifying and underlying causes of problems or defects in a process.
Knowledge of data analysis to collect and analyze data related to a process to measure its ...
4 Opening(s)
4.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 5.00 LPA
CAPEX pproposal and designing of brown and green field projects.
Preparing Basic Engineering Package consisting design basis document, material balance, energy balance, Utility calculations, development of Process Flow
Development of P&IDs and layout.
Preparing process datasheet for equipment’s like batch reactors, agitators, vessel, ANF, RVD, pumps, heat exchanger, storage tanks etc.
Technical reviewing of GA drawing for fabrication.
Reviewing techno commercial ...
1 Opening(s)
3.0 Year(s) To 4.5 Year(s)
3.00 LPA TO 3.60 LPA
Process Engineer :
Design and Optimization:
o Process engineers are involved in designing and optimizing various processes related to oil and gas production.
o They develop project specifications, design philosophies, process flow diagrams (PFDs), and piping and instrumentation diagrams (P&IDs).
o Their work ensures compliance with client requirements and contributes to the efficient functioning of ...
3 Opening(s)
1.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 11.00 LPA
Summary of essential Job functions
Achieve process Service Level Agreements / metrics – productivity and quality targets within the established timelines
Ensure process guidelines are followed and met as documented
100% Process adherence to transaction processing timelines involving transactions and other measurable metrics
Adhere to shift handover process
Record data relating to production statistics, end-user ...
7 Opening(s)
2.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 3.00 LPA
Post :
QA Engineer In Process - 04
QA Engineer Inward - 03
Education: BE/ Dip (Mech)
Experience: 2-4 years
Keywords: Fabrication / Weld Shop department experience candidates should be preferred
Job Profile
QA Engineer Inward
Conducting Process Audit, Product Audit, Supplier Audit as per plan.
Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis.
Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies.
Monitoring In-Ward & Final Inspection.
1st piece in process inspection report & taking C.A. if any.
In handling customer complaints and their solutions.
To maintaining quality related document calibration report, Inspection report and etc.
To take follow up on supplier corrective action reports.
Preparing the control plan of In-Ward, Final& In-Process component.
Preparing PPAP, PFMEA for new development components
QA Engineer In Process
Monitoring of special processes (Welding).
Monitor & Handle Customer feedbacks & complaints.
Handle all type of gauges and ...
1 Opening(s)
8.0 Year(s) To 11.0 Year(s)
25.00 LPA TO 35.00 LPA
1. Lending Operation:
Owning end-to-end Lending operations flow – including, KYC verification, disbursals, post-disbursal collection flow, Customer support, Partner coordination, etc.; including -Loan disbursal flow, adhering to the designed process
Loan KYC & verification process with accuracy and efficiency
Reconciliations from system and bank transfers
Validation of loan documents
Loan cancellation process, etc.
Owning the Customer ...
1 Opening(s)
8.0 Year(s) To 20.0 Year(s)
24.00 LPA TO 40.00 LPA
Role/ Job Title: Product Lead – BPRG
Function/Department: TURBO Cross Sell
Job Purpose:
Role is in the Cross sell COE which solely takes care of the entire Cross sell capability across the bank ranging across all the products from retail assets to retail liabilities.The business is a horizontal capability in the bank which aims to ...