1 Opening(s)
7.0 Year(s) To 15.0 Year(s)
6.00 LPA TO 8.00 LPA
Support the maintenance manager in overseeing all maintenance activities related to pilger machines used in seamless tubes and pipes production.
Assist in developing and implementing preventive maintenance schedules to ensure optimal performance and uptime of pilger machines.
Coordinate with maintenance technicians to prioritize and schedule repair and maintenance tasks, minimizing downtime and ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.40 LPA
Job description
13.05.24
HPS/2024/288
Painting Operator 5 colour Printing machin Operator Heidleberg
Male
1
1to 2
12th / ITI Fitter
Painting and coating machine operators set up and run machines that coat or paint products. Painting and coating machine operators control, clean, and maintain their machines. These machines apply coatings and paints to a wide variety of products
3 Opening(s)
3.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 3.50 LPA
Key Duties and Responsibilities• Design, Promote and Carry out Preventative Maintenance• Ensure all machines are safe and fit for purpose• Installation of new machines and equipment• Overhaul and upkeep and repair of all plant machines including;1. Tube Washer m/c.2. Fining m/c.3. Cab Furnace .4. All utility equipment’s like Air Compressor ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.80 LPA TO 6.00 LPA
JOB DESCRIPTION
23/03/2024
HPS/2024/170
Electrical & Mechinical Maintainence Eng
male
1
5 to 10
DME/DEE/B.Tech Electrical, Mechinical
Performs scheduled maintenance and preventative repairs on all electrical systems, equipment, and machinery.
The person hired in this position will also review maintenance schedules and adjust them as necessary to keep systems functioning at peak levels.
Maintenance engineers undertake scheduled and breakdown maintenance of ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.00 LPA TO 5.00 LPA
Location :- Bhosari
knowledge about Selection of tools according to operations
Knowledge about Operating and ProgrammingCNC &VMC machines.
Knowledge aboutJob settingCNC &VMC machines.
CNC & VMC programming & of Fanuc and Mitsubishi controls etc.
2D Programming on VMC.
All Machine Shop Dept. Problem-solving
Programming of new parts
Managed and supervised CNC & VMC Operators.
Programmed and set up machines ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
4.00 LPA TO 7.00 LPA
Responsible for Planning of Pharma Machines(Injectable dry powder and liquid filling) & All types of Machines (washing,sealing,capping & labeling).
Maintaining good quality of machine and components as per company standards
Preparation of costing sheets for individual machines and for projects for cost benefits and for healthy negotiation with vendors to get the higher discounts on existing ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 4.00 LPA
Location :- Bhosari
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to ...
1 Opening(s)
3.0 Year(s) To 4.0 Year(s)
2.00 LPA TO 4.00 LPA
Location :- Markal
knowledge about Selection of tools according to operations
Knowledge about Operating and ProgrammingCNC &VMC machines.
Knowledge aboutJob settingCNC &VMC machines.
CNC & VMC programming & of Fanuc and Mitsubishi controls etc.
2D Programming on VMC.
All Machine Shop Dept. Problem-solving
Programming of new parts
Managed and supervised CNC & VMC Operators.
Programmed and set up machines ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Location :- Bhosari
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Location :- Ambad Nashik
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports ...