1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
40.00 LPA TO 50.00 LPA
Key Responsibilities6.1. Safety Department Build-Out & Leadership• Establish org structure, reporting lines, KPIs, governance framework, and hiringroadmap• Set and own measurable leading indicators (near-miss reporting rate, PTWcompliance, training completion, drill frequency) reported to Directors monthly• Build a culture where every engineer and technician has the authority andconfidence to raise safety ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.20 LPA
A PTW Welding Operator (Pull-Through Welding or Portal Type Welding Operator) operates automated gantry or portal-type welding systems—typically utilizing Submerged Arc Welding (SAW) technology—to manufacture heavy structural steel components like H-beams and I-beams in pre-engineered building (PEB) and fabrication plants.
Job Purpose
To set up, operate, and monitor automated pull-through or portal ...
- Ptw Welding Operator
- Welding Operator
- Welder
- Industrial Welder
- Production Welder
- Fabrication Welder
- Structural Welder
- Pipe Welder
- Plant Welder
- Steel Plant Welder
- Maintenance Welder
- Mig Welder
- Tig Welder
- Arc Welder
- Gas Welder
- Stick Welder
- Smaw Welder
- Gtaw Welder
- Gmaw Welder
- Fcaw Welder
- Mag Welder
- Co2 Welder
- Submerged Arc Welding Operator
- Heavy Fabrication Welder
- Pressure Vessel Welder
- Boiler Welder
- Pipeline Welder
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
Work Location: Kurla
Days of working - 5 days
Shift timings - 9 hrs duty
Salary - Best in the market
Benefits - Pf , Mediclaim , Insurance
Gender: MalePayroll - it will be on third party pay roll of Talisman HR Solutions
Position Summary
The Safety Officer will be responsible for implementing, monitoring, and enforcing Health, Safety & Environment (HSE) requirements ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
1 Opening(s)
10.0 Year(s) To 12.0 Year(s)
18.00 LPA TO 18.00 LPA
Role Purpose
The Assistant Manager / Deputy Manager – EHS will be responsible for implementing and driving Environment, Health & Safety (EHS) systems across Operations & Maintenance (O&M) activities for hybrid renewable energy assets comprising Solar PV plants, Wind Farms, Pooling Substations (PSS), and associated HV/EHV transmission infrastructure. The role will ensure ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
A Turbine Operator (or Turbine Field Operator) in a power plant is a hands-on technical role responsible for the safe operation, monitoring, and maintenance of turbines, generators, and auxiliary systems. They work on-site to inspect machinery, control start/stop procedures, manage lubrication and cooling systems, and ensure compliance with safety protocols ...
2 Opening(s)
3.0 Year(s) To 12.0 Year(s)
3.00 LPA TO 8.00 LPA
Job Responsibilities:
Implement and monitor EHS policies, safety procedures, and plant safety standards.
Conduct safety inspections, audits, hazard identification, JSA, and risk assessments.
Ensure compliance with PPE, PTW, LOTO, work-at-height, confined space, and hot work procedures.
Investigate accidents, incidents, near misses, and recommend corrective/preventive actions.
Conduct safety induction, toolbox talks, and regular safety training for ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
Position: EHS Executive
Location: Jhagadia - Ankleshwar
Experience: 3 - 5 Years
Industries: Chemical
Responsibilities:
Ensure compliance with EHS policies, statutory requirements, and applicable environmental regulations.
Conduct regular safety inspections, risk assessments, and workplace audits.
Implement and monitor HIRA, JSA, PTW, LOTO, and other safety procedures.
Handle chemical safety, hazardous material storage, handling, and transportation ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 2.30 LPA
We are looking for a skilled Gas Cutter / Welder for fabrication, cutting and welding activities in a DRI/Sponge Iron Plant. The candidate will be responsible for performing gas cutting, arc welding and repair/fabrication work on plant structures, equipment and mechanical components while following strict safety procedures.
Required Skills
Good knowledge of ...
2 Opening(s)
3.0 Year(s) To 12.0 Year(s)
3.00 LPA TO 8.00 LPA
Job Responsibilities:
Implement and monitor EHS policies, safety procedures, and plant safety standards.
Conduct safety inspections, audits, hazard identification, JSA, and risk assessments.
Ensure compliance with PPE, PTW, LOTO, work-at-height, confined space, and hot work procedures.
Investigate accidents, incidents, near misses, and recommend corrective/preventive actions.
Conduct safety induction, toolbox talks, and regular safety training for ...