1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
8.00 LPA TO 8.40 LPA
Job Responsibilities:
Lead and execute detailed engineering & design of Water Treatment Plants (WTP) and Wastewater Treatment Plants (WWTP)
Prepare P&IDs, GA drawings, equipment layouts, technical specifications, and BOMs
Perform process calculations, equipment sizing and selection for pumps, filters, clarifiers, aeration systems, etc.
Coordinate with process, mechanical, civil, electrical and instrumentation teams for integrated ...
1 Opening(s)
7.0 Year(s) To 15.0 Year(s)
6.00 LPA TO 7.00 LPA
- Diploma or degree in the mechanical field preferable.
- Experience of min 6 to 12 years in Special Purpose Machine (SPM)designing.
- Auto-CAD 2D, 3D and Inventor expertise
Main position activities and responsibilities
- Participates in job order design from job order roll-out;
- Design from Concept to finalisation, detailing, preparation of BOM, releasing ...
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 5.50 LPA
Roles & Responsibilities :
Set up the SOP for site survey and design. Supervise the work of the design engineer for accuracy, and optimization of design as per site survey conducted.
Ensure BoM is designed to maximize cost-benefit to achieve while keeping losses at a minimum.
Conduct site surveys before plant design and ...
5 Opening(s)
4.0 Year(s) To 22.0 Year(s)
10.00 LPA TO 18.00 LPA
Job Description :
Experience in either of below areas of chemical engineering,
Basic engineering for new plant design.
Detail engineering for new plant design.
Budgeting, costing, specification preparation.
Construction work co-ordination.
Testing, trials for new plant commissioning.
Trial production.
Scale up of products from R&D to pilot plant.
Experience in development of green field sites.
Work experience in design/ Technology/ ...
5 Opening(s)
15.0 Year(s) To 22.0 Year(s)
10.00 LPA TO 22.00 LPA
Job Description :
Experience in either of below areas of chemical engineering,
Basic engineering for new plant design.
Detail engineering for new plant design.
Budgeting, costing, specification preparation.
Construction work co-ordination.
Testing, trials for new plant commissioning.
Trial production.
Scale up of products from R&D to pilot plant.
Experience in development of green field sites.
Work experience in design/ Technology/ ...
1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
Not Disclosed by Recruiter
Position- Lead Mechanical Rotating Equipment.Experience - 15- 20 yearsQualification - B. Tech/B.E.(Mechanical)Industry - Oil& Gas /Power.Location - Gurugram Sec-18
Job Title
: Lead Mechanical Rotating
Department / Location:
: ENKA India Projects – Gurgaon Office
Reports to:
: Plant Design Engineering Group Supervisor
Job Summary:
Experienced Mechanical Engineer specializing in rotating equipment (compressors, pumps, fans, seal systems) for Oil & Gas FEED, Tenders and Detailed Engineering projects.Strong expertise ...
1 Opening(s)
12.0 Year(s) To 18.0 Year(s)
Not Disclosed by Recruiter
1) Understanding the flow for the entire project cycle from concept to plant handover
2) Acting as a Single Point Contact for the Clients
3) Preparation of conceptual layout
4) Specification sheet preparation.
5) Tender Preparation
6) Project Coordination with the project Team & Client.
7) Coordination with other departments within the company.
8) Working knowledge of ...
10 Opening(s)
6.0 Year(s) To 20.0 Year(s)
Not Disclosed by Recruiter
Electrical Engineering (Physical design)
Knowledge in Electrical physical design like conceptualization and preparation of Air Insulated Switchyard, Gas Insulated substation, switchgear room layout, Control building layout, transformer yard layout, overall raceway layout, building raceway layouts, earthing layouts, Lightning layouts, lighting layouts, providing interdisciplinary inputs, interference resolution. Experience of working in 2D ...
5 Opening(s)
5.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
Piping Engineer
• Pipe sizing, BOQ for Piping, fitting, Valves, Pipe supports selection and thermal insulation, Knowledge of Pipe thermal Insulation calculation as per ASME and IS code, Good knowledge of piping material selection, Knowledge of ASTM, ASME BPVC and IS code.
• Review of piping Isometric and composite drawings, Interdisciplinary Assignment loading, ...
1 Opening(s)
16.0 Year(s) To 18.0 Year(s)
18.00 LPA TO 20.00 LPA
Key Tasks and Responsibilities ::
? To Lead the Plant Design and Engineering Division.
? Responsible for entire Project Planning and Monitoring of Operations technically and commercially.
? To coordinate with external services agencies/ associates/ consultants.
? To execute various design & engineering related projects as a Team Leader as and when required.
? To ...